en Intelligent dosing system
Pull out the detergent drawer.
1.
Open the dispenser cover.
2.
Pour liquid detergent
3.
softener
into the relevant dis-
pensers.
→ "Detergent drawer", Page 18
Do not exceed the marking for the
maximum filling level when filling.
Close the dispenser cover.
4.
Note: To prevent the liquid deter-
gent or fabric softener from drying
out, close the dispenser cover im-
mediately after filling.
If required, add cleaning aids such
5.
as stain remover, water softener or
bleach into the compartment for
manual dosing.
→ "Adding detergent and care
product", Page 31
Push in the detergent drawer.
6.
Adjust the basic dosage
7.
→ Page 34.
34
15.3 Basic dosage
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
Adjusting the basic dosage
1.
a The display shows the basic
and fabric
2.
3.
4.
Press and hold i-Dos for approx.
3 seconds.
dosage set for
To adjust the basic dosage for
press i-Dos.
To adjust the setting, press
min..
To end the setting process, wait
briefly.
.
,
ter-