Table of Contents
Advertisement
en Childproof lock
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press inicio pausa + carga.
5.
13.9 Cancelling the pro-
gramme
Press inicio pausa + carga.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
programme.
– If the water level is high, start
the
programme or select a
suitable programme for draining.
→ "Programmes", Page 25
Remove the laundry → Page 32.
3.
13.10 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡ Rinse Stop is activated.
¡ The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
Set the
programme or a pro-
1.
gramme for draining the water.
→ "Programmes", Page 25
Press inicio pausa + carga.
2.
13.11 Unloading the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.12 Switching off the appli-
ance
Turn the programme selector to
1.
32
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
▶
tons for approx. 3 seconds.
a The display shows
a The controls are locked.
a The childproof lock remains active
even after the appliance has been
switched off and in the event of a
power failure.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press and hold the two
▶
tons for approx. 3 seconds.
goes out in the display.
a
.
3 s but-
.
3 s but-
Advertisement
Table of Contents
