Edge Flaring Tools; Replacement Pellets - Cole Parmer X-Press XP-400 Manual

3619A (31 mm) Pre-Flared Spec-Cap
The nominal outer diameter measures 31 mm wide x 8 mm deep, for (#3623) die.
Produces pressed disc 31 mm x 5 mm. The (#3619A) has been pre-flared for a snug fit in
the (#3623) die, and has an unpainted surface. It may be substituted for the (#3619) 30
mm Spec-Cap in all applications where flaring is recommended. Eliminates need for
(#3618) Edge-Flaring tool. Sold in package of 100 and 1000 (#3619AM).
3615 (33 mm) Spec-Cap
The nominal outer diameter measures 33 mm wide x 8 mm deep, for (#3616) die.
Produces pressed disc 35 mm x 5 mm. Outside painted to prevent seizure in die and to
facilitate labeling. Recommend for use with (#3625) Edge-Flaring tool. Sold in package
of 100 and 1000 (#3615M).
3617 (38 mm) Spec-Cap
The nominal outer diameter measures 38 mm wide x 8 mm deep, for (#3614) die.
Produces pressed disc 40 mm x 5 mm. Outside painted to prevent seizure in die and to
facilitate labeling. Recommend use of (#3618) Edge-Flaring tool. Sold in package of 100
and 1000 (#3617M).

EDGE FLARING TOOLS

3618 Edge-Flaring Tool
For (#3617 and #3619) Spec-Caps®. This tool widens the Spec-Caps® rim to ensure a
tight fit against the inner wall of the die, thus preventing sample loss and pellet jamming.
3625 Edge-Flaring Tool
For (#3615) Spec-Caps®. This tool widens the Spec-Caps® rim to ensure a tight fit against
the inner wall of the die, thus preventing sample loss and pellet jamming.

REPLACEMENT PELLETS

If quantities of extremely hard materials are to be pressed, we recommend the use of the tungsten carbide
pellets.
3613ST (13 mm) Steel Pellets
For (#3613) die, sold in pairs.
3623ST (31 mm) Steel Pellets
For (#3623) die, sold in pairs.
1300-87063-1M, REV. 3
Page 9