Product Overview; Controls - Toro 72907 Operator's Manual

Product Overview

Side Discharge Machine Shown
1. Side-discharge deflector
2. Height-of-cut deck-lift
pedal
3. Parking-brake lever
4. Transport lock

5. Controls

6. Motion-control levers
7. Roll bar
Figure 4
8. Rear-shock assembly
(machines with MyRide™
only)
9. Seat belt
10. Fuel cap
11. Mower deck
12. Caster wheel
13. Front-shock assembly
(machines with MyRide™
only)
Controls
Become familiar with all the controls before you start
the engine and operate the machine.
Control Panel
g029631
1. Blade-control switch
(power takeoff)
2. Throttle control
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure
Choke Control
Use the choke control to start a cold engine.
Blade-Control Switch (Power
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (Figure
The hour meter displays when you are operating
the machine and momentarily when you shut off the
engine. The display turns off after 5 minutes.
15
Figure 5
3. Hour
meter/Safety-interlock
display
4. Key switch
, R , and S . Refer to
FF UN TART
28).
LOW
5).
6).
g232246
to F
AST
(Figure 5).