Pioneer QUANTUM INVERTER Series Service & Troubleshooting Manual page 69

Procedure
3) Open the horizontal louver(below)
and bend the louver lightly to loosen
the leftmost hook, then push the hook
towards right to loosen the second
hook (see Fig. 3).
4) Remove the horizontal louver(below)
towards the left (see Fig. 3).
5) Remove the horizontal louver(above)
with the same way (see Fig. 4).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Indoor Unit Disassembly

Figure 3
Figure 4
20
