Pioneer QUANTUM INVERTER Series Service & Troubleshooting Manual page 100

3.2.2. Electronic Control Box Subassembly Removal (EW-3)
Procedure
1) Remove the 5 screws, and release
two hooks, then remove the
electronic control box subassembly.
see Fig. 1).
Note: Electric control box cover
cannot be removed.
Note: This section is for reference only. Actual unit appearance may vary.
YN018GMFI22RPE / YN024GMFI20RPD / YN024GMFI22RPE
Illustration
Outdoor Unit Disassembly

Scope of Models Covered:
Figure 1
17
