Recording Mode - Toshiba RD-XS55 Quick Reference

Selecting a channel
1
Press INPUT SELECT to select the input
to which the cable box is connected
(2ch/3ch/4ch/Line1, page 5, 6).
2
Press CH/Page or the number buttons.
If you did not connect a cable box:
Press CH/Page or the number buttons.
Recording a current program
1
Press HDD or DVD to select a media to
record on.
HDD : To record on the HDD.
DVD : To record on a DVD-RAM/R/RW disc.
The HDD or DVD indicator illuminates.
2
Press REC MODE repeatedly to select a

recording mode.

The recorder stores 5 user recording modes to facilitate
the selection of picture and sound quality.
Each time you press REC MODE, the indicator on the
front panel display changes.
SP: Standard setting. (Default at factory set)
LP: For longer recording, but inferior to "SP" in
picture quality.
MN: Customized setting of bit rate.
You can set one recording mode as default. Also you
can customize each recording mode. See
3
Press REC.
Recording starts.
To stop recording
Press STOP.
Note
• One recording cannot exceed 9 hours even if the HDD is
selected.
When a DVD disc is used, the time that can be recorded varies
according to the recording mode and the residual capacity of
the disc.
Checking the disc capacity
Press REMAIN.
The disc capacity is displayed at the bottom of the screen.
To turn it off, press REMAIN again.
– 9 –
183 .
O