Operation; Before Initial Commissioning; Switching The On-Board Computer On/Off - Bosch Kiox Original Operating Instructions

Kiox holder can be swivelled sideways. Put the on-board computer in the
holder. Screw the locking screw (M3 thread, 6 mm long) from below into the
thread provided in the on-board computer (using a longer screw may dam-
age the on-board computer). Swivel the holder back into place and tighten
the headset screw in accordance with the manufacturer's specifications.

Operation

Before initial commissioning

Before first use, remove the protective film from the display in order
u
to ensure the full functionality of the on-board computer. If the pro-
tective film remains on the display, this can impair the functionality/per-
formance of the on-board computer.
The full functionality of the on-board computer cannot be guaranteed
u
if the protective display film is used.
The protective film on the screen is not suitable for long-term use. To
u
prevent the adhesive causing damage to the screen, it is recommended
to remove the protective film from the screen.
Kiox is supplied with a built-in partially charged battery. Before using it for
the first time, this battery must be charged for at least one hour via the USB
port or via the eBike system (see "Power supply of the on-board computer",
page English – 16).
The operating unit should be attached such that the buttons are almost per-
pendicular to the handlebars.
When using the on-board computer for the first time, the language selection
page is displayed initially. You can then select the <Intro to Kiox> menu
item to read explanations of key functions and displays. The menu item can
also be called up at a later time via <Settings> → <Information>.

Switching the on-board computer on/off

To switch on and switch off the on-board computer, briefly press the on/off
button (4).
Bosch eBike Systems
English – 14
1 270 020 Ken | (07.09.2023)