Table of Contents
Advertisement
Quick Links
Distance-settable Photoelectric Sensor
Switching between background and foreground
suppression (BGS/FGS) enables detecting a vari-
ety of objects under various background/fore-
ground conditions.
Influence of external interference, including
inverter fluorescent lighting, minimized with
unique avoidance algorithm.
Red beam for easy spot position confirmation.
Almost no differences in detection distances for
different colors.
Minimal hysteresis to enable detecting small steps
(2/3rds of previous models: E3Z-LS20@4S).
Same compact size as the E3Z Series: Use the
same Mounting Brackets.
Ordering Information
Sensors
Sensing
Appearance
method
Distance-
settable
Note:
Models are also available with 0.5-m cables. Specify the cable length after the model number (example: E3Z-LS61 0.5M).
Accessories (Order Separately)
Sensor I/O Connectors
Cable
specification
Standard M8
Straight
cable
L-shaped
Note:
Refer to page 11 for details on Mounting Brackets.
Connection
Sensing distance (white paper)
method
Pre-wired (2-m
20 mm
40 mm
cable)
BGS (at min. setting)
(See note.)
M8 Connector
Appearance
200 mm
Incident light level
threshold (fixed)
BGS (at max. setting)
FGS (at min. setting)
FGS (at max. setting)
Cable type
2 m
5 m
2 m
5 m
E3Z-LS
Model
NPN output
PNP output
E3Z-LS61
E3Z-LS81
E3Z-LS66
E3Z-LS86
Model
4-wire
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
1
Advertisement
Table of Contents
Related Manuals for Omron E3Z-LS
Summary of Contents for Omron E3Z-LS
- Page 1 E3Z-LS Distance-settable Photoelectric Sensor Switching between background and foreground suppression (BGS/FGS) enables detecting a vari- ety of objects under various background/fore- ground conditions. Influence of external interference, including inverter fluorescent lighting, minimized with unique avoidance algorithm. Red beam for easy spot position confirmation.
-
Page 2: Application Example
E3Z-LS E3Z-LS Application Example Simple Detection of Glossy, Uneven Objects Selectable by BGS (Background Suppression) FGS (Foreground Suppression) Changing Cable Connection Glossy, uneven objects are reliably detected because the OFF (incident) status occurs only when the conveyor is detected, and... -
Page 3: Specifications
E3Z-LS E3Z-LS Specifications Ratings/Characteristics Sensing method Distance-settable Item NPN output E3Z-LS61 E3Z-LS66 PNP output E3Z-LS81 E3Z-LS86 Sensing distance White or black paper (100 x 100 mm): 20 mm to set distance White paper (100 x 100 mm): Set distance to 200 mm min. -
Page 4: Engineering Data
E3Z-LS E3Z-LS Engineering Data Operating Range Spot Diameter vs. Sensing Distance Set distance: 40 mm, 200 mm Set distance: 40 mm, 200 mm Sensing object: White paper, Sensing object: White paper, 100 mm x 100 mm 100 x 100 mm... -
Page 5: Operation
E3Z-LS E3Z-LS Operation Note: The VERY FAR region is supported only for FGS. The in- Incident light level Distance threshold threshold (not settable) cident light level threshold is fixed and cannot be set. (set distance) NEAR VERY FAR Only for FGS... -
Page 6: Pnp Output
E3Z-LS E3Z-LS PNP Output Model Output Timing chart Mode BGS/FGS Output circuit transis- selec- selection tor sta- tion method switch E3Z-LS81 Light ON L side BGS: NEAR E3Z-LS86 (L/ON) Either Operation leave the indicator pink wire (orange) Output (2) open or... - Page 7 E3Z-LS E3Z-LS Nomenclature Set distance adjuster (5-turn endless adjustment) Stability indicator Operation indicator (green) (orange) Operation selector Dimensions Sensors with M8 Connectors Pre-wired Sensors E3Z-LS66 E3Z-LS61 E3Z-LS86 E3Z-LS81 12.7 12.7 Operation indicator (orange) Operation indicator (orange) 10.8 10.4 10.8 10.4...
-
Page 8: Correct Use
E3Z-LS E3Z-LS Precautions • If the connector is not connected securely, it may be disconnect- !Caution ed by vibration or the proper degree of protection of the Sensor Do not connect an AC power supply to the Sensor. If AC power may not be maintained. - Page 9 E3Z-LS E3Z-LS Install the Sensor as shown in the following illustration if each sensing object greatly differs in color or material. Moving direction Moving direction Adjustments Indicator Operation Distance threshold Incident light level threshold (settable) (not settable) Not sufficient incident...
- Page 10 E3Z-LS E3Z-LS E3Z Series Lineup Complete E3Z Series Lineup: Photoelectric Sensors for the 21st Century Sensing Distance- Diffuse reflective Narrow-beam Retroflective Retroflective for PET Through-beam Grooved type method settable diffuse reflective bottles Item (NEW) Appearance Model E3Z-LS E3Z-D E3Z-L E3Z-R...
- Page 11 E3Z-LS E3Z-LS Mounting Brackets (Same for Entire E3Z Series) Appearance Model Remarks Appearance Model Remarks E39-L153 Mounting Bracket E39-L150 1 set Sensor Adjustors For easy mounting and adjustment with alumi- num frames and rails, such as those on con- veyors...
- Page 12 E3Z-LS E3Z-LS ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. E327-E1-01 In the interest of product improvement, specifications are subject to change without notice.
Need help?
Do you have a question about the E3Z-LS and is the answer not in the manual?
Questions and answers