3.1
Camera Configuration Examples
Figure 12: Possible Camera Mounting Locations
Following are the best practices for mounting the camera.
•
One lane per camera.
•
Camera aiming calibration is done with the IR camera, not color camera.
•
Cameras should be positioned before you use the LPR scanning.
•
Cameras are selected based on the use case scenarios.
•
Use the CarDetector Mobile "Camera Aiming Tool" for aiming assistance.
Mobile Camera
ReaperHD/L5M 6 mm
ReaperHD/L5M 8 mm
Suitable Usage
Short Parking
Long Parking
MN009210A01-AB
Chapter 3 : Camera Configurations
25