Advertisement
03-5. Detailed precautions for solder rework
(1)Flux-applying tool
To prevent solder creeping to a contact section,
we recommend the use of a
apply an appropriate amount of flux.
(e.g., BON-102F, Japan Bonkote)
(2)Selection of soldering iron
For narrow-pitch connectors with a 0.35-mm pitch, we recommend:
- An iron tip with a
- With a temperature sensor on the iron tip
- Temperature-controllable iron tip
It is also necessary to check that there are no differences between the
indicated temperature and the actual temperature of the iron tip.
The following temperatures are recommended for iron tips:340–360˚C
Panasonic Corporation
industrial.panasonic.com/ac/e/
Operation manual for Narrow-pitch connectors A35UH
brush pen
Conventional tool: Dropper
retractable-knife shape
Ex. Japan Bonkote
(BJ5-KF)
that can
Recommended: Brush pen
(BJ7-KF)
©
- 21 -
Panasonic Corporation 2017
ACCTF32E 201704
Advertisement
