R911299722 / 02 | Rexroth IndraControl VCP 20
Interfaces
7.2.2
INTERBUS (X2.1 / X2.2)
Electric Drives and Controls | Bosch Rexroth AG
The device can be integrated into the INTERBUS using the interfaces
available for INTERBUS connections.
Fig. 7-22: Rear view INTERBUS
1. Front Panel
2. Fastening Screws
3. Warning
4. Assignment Male Connector X2.1 (Remotebus in)
5. Male Connector X2.1 (Remotebus in)
6. Assignment Female Connector X2.2 (Remotebus out)
7. Female Connector X2.2 (Remotebus out)
8. Diagnostic LEDs
9. Nameplate
10. Battery-related information
11. Assignment Female Connector X3 (SER2 RS232c)
12. Fastening Screw for X3
13. Female Connector X3 (SER2 RS232c)
14. Assignment for User Mode Switch
15. User Mode Switch
16. Assignment Connector X1 (Supply Voltage)
17. Connector X1 (Supply Voltage)
18. Threaded Bolt for Protective Grounding
19. Warning
7-13