Download Print this page

Kenwood FDM71.970SS Instructions Manual page 14

Advertisement

Using The Attachments
Refer to the usage chart, illustrations
and relevant section for each
attachment.
14A
Glass Blender
To Use Your Blender
14A
Illustrations
1
Fit the sealing ring into the blade unit -
ensuring the seal is located correctly in the
grooved area.
Leaking will occur if the seal is damaged or
incorrectly fitted.
2
Screw the goblet onto the blade assembly.
Refer to the graphics on the underside of the
blade unit as follows:
- Unlocked position
- Locked position
3
Put your ingredients into the goblet.
4
Fit the lid to the goblet and push down to
secure. Fit the filler cap.
5
Place the blender onto the power unit and
turn clockwise to lock.
The appliance will not operate if the blender
is incorrectly fitted to the interlock.
14B
Plastic Blender
14B
Illustrations
1
To assemble and use - refer to the Blender
illustrations and the Recommended Usage
Chart.
2
Put your ingredients into the goblet.
3
Fit the lid onto the goblet and turn clockwise
until it clicks.
4
Fit the blender to the power unit and turn
clockwise to lock in position.
The appliance will not operate if the blender
is incorrectly fitted to the interlock.
Hints and Tips
When making mayonnaise, put all the
ingredients, except the oil, into the blender.
With the appliance running:
Glass Blender - remove the filler cap and
pour the oil through the hole in the lid.
Plastic blender - pour the oil through the
drip feed hole in the lid.
Thick mixtures, e.g. pâtés and dips, may need
scraping down. If the mixture is difficult to
process, add more liquid.
The processing of spices is not
recommended as they may damage the
plastic parts.
(if supplied)
(if supplied)
Knife Blade
15
Follow the instructions under 'To Use Your Food
Processor'.
Hints and Tips
For coarser textures use the pulse control.
Cut food such as meat, bread, vegetables
into cubes approximately 2cm.
Biscuits should be broken into pieces
and added down the feed tube whilst the
appliance is running.
Take care not to over-process.
When making pastry use fat straight from
the fridge cut into 2cm cubes.
For best results when processing sticky
fruit/ingredients such as dates, use 'Pulse'
first to break down the ingredients and then
continue processing on maximum speed.
Dough Tool
16
Use for yeasted dough mixes.
Follow the instructions under 'To Use Your Food
Processor'.
Hints and Tips
Do not process for longer than 60 seconds.
Place the dry ingredients in the bowl and
add the liquid down the feed tube whilst the
appliance is running. Process until a smooth
elastic ball of dough is formed.
Re-knead by hand only. Re-kneading in the
bowl is not recommended as it may cause
the processor to become unstable.
Dual Whisk
17
1
Fit the bowl onto the power unit, add the
detachable drive shaft.
2
Push each beater into the drive head.
3
Fit the whisk by carefully turning until it
drops over the drive shaft.
4
Add the ingredients.
5
Fit the lid - ensuring the end of the shaft
locates into the centre of the lid.
6
Switch on.
important
The whisk is not suitable for making all
in one cake mixes as these mixes are too
heavy and will damage it. Always use the
knife blade.
Hints and Tips
Best results are obtained when the eggs
are at room temperature.
Ensure the bowl and whisks are clean and
free from grease before whisking.
8

Advertisement

loading

This manual is also suitable for:

Multipro express weigh+