Bosch WAV28K40AU User Manual And Installation Instructions

Hide thumbs Also See for WAV28K40AU:

Advertisement

Quick Links

Washing machine
WAV28K40AU
User manual and installation instructions
[en]

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WAV28K40AU

  • Page 1 Washing machine WAV28K40AU User manual and installation instructions [en]...
  • Page 2: Table Of Contents

    en Safety Further information and explanations are available online: Table of contents Detergents and care products......  14 Basic operation ..........  14 INFORMATION FOR USE Childproof lock..........  16 Safety ..............  2 Intelligent dosing system .........  16 Preventing material damage ......  5 Home Connect ..........  17 Environmental protection and saving en- Basic settings............  18 ergy ..............  5 Cleaning and servicing ........  19...
  • Page 3 Safety en If this appliance is not correctly installed in a 1.4 Safe installation washer-dryer stack, the installed appliance WARNING ‒ Risk of electric shock! may fall. Incorrect installation is dangerous. ▶ Only stack the dryer on a washing machine ▶ Connect and operate the appliance only in using the connection kit from the dryer accordance with the specifications on the manufacturer .
  • Page 4: Safety

    en Safety 1.5 Safe use CAUTION ‒ Risk of injury! The covering plate may break if you stand on WARNING ‒ Risk of electric shock! or climb onto the appliance. If the appliance or the power cord is dam- ▶ Do not stand on or climb onto the appli- aged, this is dangerous.
  • Page 5: Preventing Material Damage

    Preventing material damage en WARNING ‒ Risk of injury! WARNING ‒ Risk of poisoning! The use of non-original spare parts and non- Poisonous fumes may be given off if you use original accessories is dangerous. cleaning agents that contain solvents. ▶ Only use the manufacturer's original spare ▶...
  • Page 6 en Installation and connection Set the maximum spin speed if you want to dry the The appliance comes with an AquaSensor. laundry in the tumble dryer afterwards. ¡ During the rinse cycle, the AquaSensor checks the ¡ The drier the laundry, the shorter the programme degree of turbidity of the rinsing water, and adjusts duration when drying which, in turn, reduces energy the duration and number of rinse cycles accord-...
  • Page 7: Installation And Connection

    Installation and connection en Unscrew and remove all of the screws for the Installation location Requirements 4 transit bolts using a WAF 13 wrench. Wooden joist floor Place the appliance on a water-resistant wooden board (minimum thick- ness of 30 mm) which is screwed tightly to the floor.
  • Page 8 en Installation and connection Push the 4 cover caps downwards. Siphon Secure the connection point with a (24–40 mm) hose clamp. Sink Fix and secure the water outlet hose with an elbow. Note: To install the transit bolts to transport the appli- ance, perform these steps again in the reverse order.
  • Page 9: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en To align the appliance, turn the appliance feet. Use a WAF 17 wrench to tighten the lock nuts Check that the appliance is level using a spirit level. against the housing until they are hand-tight. All appliance feet must stand firmly on the ground.
  • Page 10: Before Using For The First Time

    en Before using for the first time Maintenance flap for the drain pump Power cord → Page 8 → Page 19 Transit bolts → Page 7 Door Detergent drawer → Page 10 5.2 Detergent drawer Control panel → Page 10 Note: Observe the manufacturer's instructions on the use and dosage of the detergent and care product and Water outlet hose → Page 8 the information in the programme descriptions.
  • Page 11: Display

    Display en Add washing powder that contains a bleaching Push in the detergent drawer. agent to the manual dosing compartment. Press Start/Reload  to start the programme. a The display shows the remaining programme dura- tion. a After the programme has ended, the display shows: End.
  • Page 12: Buttons

    en Buttons Display Description Prewash Programme status Wash Programme status Rinse Programme status Spin Programme status Pause Programme status Program end Programme status ¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 16 Energy consumption for the selected programme.
  • Page 13 Buttons en Button Selection More information - 90 Adjust the temperature. Temperature °C  Set temperature in °C. Spin Speed  - 1400 Adjust the spin speed or activate (Rinse Hold). Set spin speed in rpm. is selected, the water is not drained at the end of the washing cycle and the spin cycle is deactivated.
  • Page 14: Accessories

    en Accessories 10  Accessories Use original accessories. These have been made especially for your appliance. Order number Water inlet hose extension Extend the water inlet hose for cold wa- WMZ2381 ter or AquaStop (approx. 2.50 m). Fixing brackets Improves the stability of the appliance. WMZ2200 Washing machine cleaners Cleaning products for maintaining the...
  • Page 15 Basic operation en Open the door. Requirements ¡ The laundry is prepared and sorted. Add or remove laundry. → "Laundry", Page 14 Close the door. ¡ The drum is empty. Press Start/Reload  Open the door. Place the laundry in the drum. 13.9 Cancelling the programme Close the door.
  • Page 16: Childproof Lock

    en Childproof lock 14  Childproof lock Secure your appliance against being operated uninten- 14.2 Deactivating the childproof lock tionally using the controls. Requirement: To deactivate the childproof lock, the ap- pliance must be switched on. 14.1 Activating the childproof lock Press and hold the two Child Lock ⁠...
  • Page 17: Home Connect

    Home Connect en Note: To adjust the basic dosage for , repeat the steps with ⁠   i-DOS. 16  Home Connect This appliance is network-capable. Connecting your ap- Use the Home Connect app to scan the QR code. pliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status.
  • Page 18: Basic Settings

    en Basic settings 16.6 Remote start 16.7 Remote diagnostics Enable the appliance for remote start via the Customer Service can use Remote Diagnostics to ac- Home Connect app. cess your appliance if you contact them, have your ap- pliance connected to the Home Connect server and if Note: Remote Diagnostics is available in the country in which Remote start is deactivated for safety reasons in the...
  • Page 19: Cleaning And Servicing

    Cleaning and servicing en Basic setting Programme position Value Description Button signal 0 (off) The volume of the audible 1 (quiet) signal emitted when the 2 (medium) buttons are pressed. 3 (loud) 4 (very loud) Drum cleaning reminder Activate or deactivate the reminder to clean the drum.
  • Page 20 en Cleaning and servicing Take the drain hose out of the holder. Since water may remain in the drain pump, unscrew the pump cap carefully. The filter insert in the pump housing may be- ‒ come stuck due to coarse particles of dirt. Loosen the dirt and remove the filter insert.
  • Page 21: Troubleshooting

    Troubleshooting en Screw the pump cap as far as it will go. Insert and close the maintenance flap. The handle on the pump cap must be in a vertical position. 19  Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service.
  • Page 22 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric softener with 0.5 litres of water and ▶ pour the mixture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down).
  • Page 23 Troubleshooting en Fault Cause and troubleshooting flashes. Door is not closed. Close the door. ▶ Laundry is caught in the door. Remove any trapped laundry. ▶ "E:30/-20" Detergent dosage is too high. If you dose manually, reduce the amount of detergent for the next washing cycle with the ▶...
  • Page 24 en Troubleshooting Fault Cause and troubleshooting The door cannot The temperature is too high. be opened. Wait until the temperature has dropped. ▶ Cancel the programme. ▶ → "Cancelling the programme", Page 15 Water level is too high. Select a suitable programme for draining. ▶...
  • Page 25 Troubleshooting en Fault Cause and troubleshooting The programme dura- The unbalanced load detection system eliminates an imbalance by repeatedly redistributing tion changes during the laundry. the wash cycle. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum.
  • Page 26 en Troubleshooting Fault Cause and troubleshooting Longer, whirring Intelligent dosing system dispenses detergent or care products. noise before the start Not a fault – normal operating noise. ▶ of the wash cycle or fabric softening. Loud noises during Appliance is not correctly aligned. the spin cycle.
  • Page 27 Troubleshooting en Fault Cause and troubleshooting Detergent residue on Unsuitable detergent added to the dispenser of the intelligent dosing system. the dry laundry. Check whether the detergent used is suitable. → "Detergents and care products", Page 14 Drain the dispenser. Clean the dispenser. Refill the dispenser.
  • Page 28: Transportation, Storage And Disposal

    en Transportation, storage and disposal Insert the maintenance flap and lock it into place. ATTENTION! Escaping water may cause material damage. Close the maintenance flap. Do not open the door if you can see water ▶ through the glass. Pull the emergency release downwards with a tool and release.
  • Page 29: Customer Service

    Customer Service en 21  Customer Service Detailed information on the warranty period and terms 21.1 Product number (E-Nr.) and production of warranty in your country is available from our after- number (FD) sales service, your retailer or on our website. You can find the product number (E-Nr.) and the pro- If you contact Customer Service, you will require the duction number (FD) on the appliance's rating plate.
  • Page 30: Technical Data

    5-GHz band (5150–5350 MHz + 5470–5725 MHz): basic requirements and other relevant provisions of Dir- max. 50 mW ective 2014/53/EU. A detailed RED Declaration of Conformity can be found online at www.bosch-home.com among the additional documents on the product page for your appliance.
  • Page 31: Declaration Of Conformity

    Declaration of Conformity en UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. 5 GHz WLAN (Wi-Fi): For indoor use only.
  • Page 32 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

Table of Contents