Inserting Memory Cards - Nikon D70 Manual
Hide thumbs
Also See for D70:
- Quicktour (22 pages) ,
- Firmware upgrading instruction (10 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Inserting Memory Cards
In place of fi lm, the D70 uses CompactFlash or microdrive memory cards
to store photographs. For a list of approved mem o ry cards, see "Technical
Notes: Approved Memory Cards" (
1
Turn the cam era off
Turn the cam era off before inserting or re-
mov ing mem o ry cards.
2
Open the card slot cover
Open the card slot cover as shown at right.
3
Insert a memory card
Insert the memory card with the rear label
toward the monitor ( ). When the memory
card is fully inserted, the access lamp will light
and the eject button will pop up ( ). Close
the card slot cover.
Inserting Memory Cards
Insert the memory card terminals fi rst. Insert-
ing the card upside down or backwards could
damage the camera or the card. Check to be
sure that the card is in the correct orientation.
The memory card slot is on a slight angle (see
illustration at right). Match the angle of the
memory card slot when inserting cards.
20
192).
Di rec tion of
insertion
Ter mi nals
Rear
label
- Quick Links:
- Getting to Know the Camera
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the D70 and is the answer not in the manual?
Questions and answers
where do i find the button for monitor on nikon d70
monitor button
When attempting to cycle through images using the multi selector images only move about the frame. How to select different photos?
To select different photos on a Nikon D70 using the multi selector:
1. Display the photographs as small thumbnail images in the selected folder.
2. Use the multi selector to highlight an image.
3. Press the multi selector up to select the highlighted image; a mark will appear on the selected image.
4. Repeat steps 2 and 3 to select additional pictures.
5. To deselect a picture, press the multi selector down when the number of prints is 1.
6. To exit without making changes, press the appropriate button.
The multi selector can be used when the monitor is on, but the focus selector lock switch must be off.
This answer is automatically generated