Advertisement
3. Get to know your CS100
Card slot cover
Remove card slot
cover to access
card slots
NFC connect point
Wi-Fi/New image notification lamp
• When images are being imported from a
camera/camcorder connected via a wireless
LAN
• When there are new images
• When images have been received from
Blinks
another Connect Station
• When a device is held close to the NFC
connect point and connection is established
• When the firmware is being updated
①
Selecting New images received on the Home screen turns off
the lamp.
②
The power lamp also blinks in green.
Serial number
4
①
①
<E> Power terminal
Power button/Power lamp
Connect Station Status
Power on
Power off
Standby
Updating the firmware
Error
Remote
control
sensor
SD card slot
CF card slot
②
<D> HDMI terminal
Power Lamp Indicator
Green (lamp on)
(lamp off)
Orange (lamp on)
Green (blinking)
Red (blinking)
Access lamp
• When images are being
imported from a card
or a camera/camcorder
connected via wired
connection
• When image data is
②
Blinks
being copied to a card
• When image data is
being backed up to an
external hard disk
• When the firmware is
being updated
When importing images
Lights up
is complete
①
The power lamp also blinks in green.
②
The lamp stays lit when the processing is
complete.
<F> LAN terminal
<G> USB terminal
①
Advertisement
