Advertisement
English
Charging in the charging stand (specific models only)
'Unplug for use' symbol
How do I use my appliance and the attachments?
1
Make sure the appliance is switched off.
2 Put the small plug in the charging stand and
put the supply unit in the wall socket.
3 Place the appliance in the charging stand.
Specific models only: The light ring on the
bottom of the charging stand lights up and
rotates quickly.
- After approximately 5 minutes, the light
ring rotates slower. The battery now
contains enough energy for one full shave.
- As the appliance continues to charge, the
light ring becomes brighter and rotates
slower.
- When the appliance is fully charged, the
light ring lights up fully and stops rotating.
4 After charging, remove the supply unit from
the wall socket and pull the small plug out of
the charging stand.
The 'unplug for use' symbol flashes to remind
you to disconnect the appliance from the wall
socket and remove the small plug from the
appliance before you switch it on.
Warning: Always check the appliance and
all accessories before use. Do not use the
appliance or any accessory if it is damaged,
as this may cause injury. Always replace a
damaged part with one of the original type.
Note: This appliance is waterproof. It is suitable
for use in the bath or shower and for cleaning
under the tap.
38
Advertisement
