Table of Contents
Advertisement
Time-setting options
en
The drip trough ‚ is
located below the cooking compartment (figure
If the seal has become detached, fit the seal
Note:
back onto the drip trough. ~ "Appliance door"
on page 32
Starting drying
To dry the cooking compartment, it is heated up so that
the moisture in the cooking compartment evaporates.
You will then need to open the appliance door to allow
the steam to escape from the cooking compartment.
Caution!
Enamel damage: Do not start any operations when
there is water on the cooking compartment floor. Before
operation, wipe away the water from the cooking
compartment floor.
Leave the appliance to cool down.
1.
Remove coarse dirt from the cooking compartment
2.
immediately and wipe away moisture from the
cooking compartment floor.
If necessary, press the # On/Off button to switch on
3.
the appliance.
Touch the i field.
4.
The options for selecting an operating mode are
displayed.
Touch the "Cleaning" text field.
5.
Touch the "Drying" text field.
6.
The duration is displayed. It cannot be changed.
Press the l Start/Stop button to start.
7.
The drying function starts and ends automatically
after 10 minutes.
Open the appliance door and leave it open for 1 to 2
8.
minutes so that the moisture in the cooking
compartment can escape.
Drying the cooking compartment by hand
Allow the appliance to cool down.
1.
Remove any food remnants from the walls of the
2.
cooking compartment.
Dry the cooking compartment with a sponge.
3.
Leave the appliance door open for 1 hour so that the
4.
cooking compartment dries completely.
22
OTime-setting options
Y our appliance has different time-setting options.
T i m e - s e t t i n g o p t i o n s
Time-setting option Use
Cooking time
q
End
r
).
#
Timer
t
You can call up the cooking time and the end time after
setting an operation using the touch-screen displays.
The timer has a separate field t and can be adjusted at
any time.
An audible signal sounds after a cooking time or timed
period has elapsed. You can cancel the audible signal
early by touching a field or touch-screen display.
You can change how long the audible signal
Note:
sounds for in the basic settings. ~ "Basic settings"
on page 25
Setting the cooking time
You can set the cooking time for your dish on the
appliance. This means that the cooking time is not
unintentionally exceeded and you do not need to
interrupt other work in order to end the operation.
Making settings
Depending on which direction you turn the rotary
selector first, the duration starts at a particular default
value: Left, 10 minutes, right, 30 minutes.
The duration can be set in one-minute increments up to
one hour, and then in five-minute increments.
The maximum setting is 23 hours and 59 minutes.
Example in the picture: It is 10:00, duration of 45
minutes.
Set the operating mode, and temperature or level.
1.
Before starting the operation, touch the "Duration"
2.
text field.
On the display, the duration is highlighted in white.
Turn the rotary selector to set the duration.
3.
The end time is calculated automatically.
After the set cooking time has elapsed, the
appliance ends the operation automatically.
Enter a cooking time and the required end
time. The appliance starts automatically so
that the operation ends at the required time.
The timer functions like an egg timer. It runs
independently of the operation and the other
time-setting options. After the set time has
elapsed, the appliance does not switch on or
off automatically.
Advertisement
Table of Contents
