Toro 140-2711 Installation Instructions

Jack Mount Kit
for TimeCutter
Model No. 140-2711
Safety
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger. Replace any decal that is
damaged or missing.
1. Warning—read the
Operator's Manual.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® Riding Mowers
127-6663
2. Crushing hazard—engage
the parking brake, shut off
the engine, and remove
the key; support the
machine using jackstands.
Register at www.Toro.com.
Installation
Determine the left and right sides of the machine from
the normal operating position.
1. Park the machine on a level surface, disengage
the blade-control switch, and move the
motion-control levers outward to the P
position.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Secure the jack mount to the frame on the left of
the machine using 2 self-tapping bolts
decal127-6663
1. Jack mount
4. Torque the bolts to 17 to 22 N∙m (150 to 200
in-lb).
Form No. 3436-474 Rev A
Installation Instructions
Figure 1
2. Self-tapping bolt
Original Instructions (EN) All Rights Reserved *3436-474* A
Printed in the USA
ARK
(Figure 1).
g307428