Download Print this page
Toro Titan 140-5125 Installation Instructions
Toro Titan 140-5125 Installation Instructions

Toro Titan 140-5125 Installation Instructions

For riding mowers

Advertisement

Quick Links

Mount Kit
for Titan
Model No. 140-5125
Safety
Become familiar with the safe operation of the
equipment, with the operator controls, and safety
signs.
Use extra care with grass catchers or other
attachments. These can change the operating
characteristics and the stability of the machine.
Follow the manufacturer's recommendations
for adding or removing wheel weights or
counterweights to improve stability.
Do not use a grass catcher on steep slopes. A
heavy grass catcher could cause loss of control
or overturn the machine.
Slow down and use extra care on hillsides. Be
sure to travel in the recommended direction on
hillsides. Turf conditions can affect the stability of
the machine. Use extreme caution while operating
near drop-offs.
Keep all movement on slopes slow and gradual.
Do not make sudden changes in speed, direction,
or turning.
The grass catcher can obstruct the view to the
rear. Use extra care when operating in reverse.
Use care when loading or unloading the machine
into a trailer or truck.
Never operate with the discharge deflector raised,
removed or altered, unless using a grass catcher.
Keep hands and feet away from moving parts. Do
not make adjustments with the engine running.
Park the machine on level ground, disengage
the drives, and shut off the engine before leaving
the operator's position for any reason including
emptying the grass catcher or unclogging the
chute.
If you remove the grass catcher, be sure to install
any discharge deflector or guard that might have
been removed to install the grass catcher. Do not
operate the mower without either the entire grass
catcher or the grass deflector in place.
Do not leave grass in the grass catcher for
extended periods of time.
Grass catcher components are subject to wear,
damage and deterioration, which could expose
you to moving parts or allow objects to be thrown.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Riding Mowers
Register at www.Toro.com.
Frequently check components and replace with
the manufacturer's recommended parts, when
necessary.
Towing Safety
Do not attach towed equipment except at the hitch
point.
Follow the attachment manufacturer's
recommendation for weight limits for towed
equipment and towing on slopes.
Never allow children or others in or on towed
equipment.
On slopes, the weight of the towed equipment may
cause loss of traction and loss of control. Reduce
towed weight and slow down.
Stopping distance increases with the weight of the
towed load. Travel slowly and allow extra distance
to stop.
Make wide turns to keep the attachment clear of
the machine.
Do not tow a load that weighs more than the
towing machine.
Original Instructions (EN)
All Rights Reserved *3436-903* A
Printed in the USA
Form No. 3436-903 Rev A
Installation Instructions

Advertisement

loading

Summary of Contents for Toro Titan 140-5125

  • Page 1 • Grass catcher components are subject to wear, damage and deterioration, which could expose you to moving parts or allow objects to be thrown. © 2019—The Toro® Company Register at www.Toro.com. Original Instructions (EN) All Rights Reserved *3436-903* A 8111 Lyndale Avenue South...
  • Page 2 Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. Stabilizer bracket Carriage bolt (5/16 x 3/4 inch) Locknut (5/16 inch) Self-tapping screw (5/16 x 3/4 inch) Use the chart below to verify that all parts have been Bolt (5/16 x 1 inch) shipped.
  • Page 3 g302477 g308335 Figure 3 Figure 5 Left side shown 1. Locknut (5/16 inch) 2. Bolt (5/16 x 1 inch) Position the pivot frame upward, and secure the Insert the bent ends of the rods into the pivot frame to the bottom of the machine frame attachment mount as shown in Figure 5 using 2 self-tapping screws (5/16 x 3/4 inch) as...
  • Page 4 Operation Note: Determine the left and right sides of the machine from the normal operating position. WARNING To avoid personal injury, follow these procedures: • Become familiar with all operating and safety instructions in the Operator's Manual for the machine before using this attachment.