Advertisement
Quick Links
Owner's IVlanuai
®
FRONT
U
E
IVlodel No. 486.24608
Fits 917 Series LT/YT/GT Tractors
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions
Call 1-866-576-8388
,,iiiiiii - ............... iiiiiiiiii
CAUTION:
Before using this product,
read
this manual and follow all Safety
Rules and
Operating
Instructions.
,, Safety
,, Assembly
,, Operation
,, Maintenance
,, Parts
Sears, Roebuck and Co., Hoffman
Estates,
IL 60179 U.S.A.
www.craftsman.com
PRINTED iN U.S.A.
FORM NO. 42033 (02/05109)
Advertisement
Related Manuals for Craftsman 486.24608
Summary of Contents for Craftsman 486.24608
- Page 1 Owner's IVlanuai FRONT IVlodel No. 486.24608 Fits 917 Series LT/YT/GT Tractors CAUTION: Before using this product, this manual and follow all Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffman www.craftsman.com PRINTED iN U.S.A. ® ,,iiiiiii - ... iiiiiiiiii...
-
Page 2: Warranty
Sears store or other Craftsman outlet in the United States for free replacement. This warranty is void if this product is ever used for commercial or rental purposes. - Page 3 iNSTRUCTiONS STEP 1: (SEE FIGURE Open parts bag labelled "A" and verify that all parts are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. STEP 2: (SEE FIGURE 3) •...
- Page 4 STEP 5: (SEE FIGURE 6) Spread ends of bumper enough to fit slots onto bolts in rear mounting holes in tractor frame. The bumper has three mounting holes. The rear holes provide the most clearance while the forward holes provide a neater appearance. Use a hole that provides enough clearance for the hood to stay in raised position when opened.
- Page 5 iNSTRUCTiONS STEP 1: (SEE FIGURE Open parts bags labelled "A" and "B" and verify that all parts needed are present. NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor. NOTE: Not all hardware will be used. Unused parts may be discarded after assembly STEP 2: (SEE FIGURE 3)
- Page 6 STEP 3: (SEE FIGURE 4) Place plug on a work bench or solid table and push end of bumper down onto plug. Repeat for remaining plugs. STEP 4: (SEE FIGURE 5) Remove any bolts present in front mounting holes in side of tractor frame.
- Page 7 STEP 5: (SEE FIGURE 6) Spread ends of bumper enough to fit slots onto bolts in rear mounting holes in tractor frame. The bumper has three mounting holes. The rear hole provides the most clearance while the forward holes provide a neater appearance. Use a hole that provides enough clearance for hood to stay in raised position when opened.
- Page 8 For expert troubleshooting For repair - in your home - of all major brand appliances, lawn and garden equipment, no matter who made it, no matter who sold it! For the replacement owner's manuals that you need to do-it-yourself. For Sears professional and items like garage door openers and water heaters.