Page 1
Owner's Manual Model No. 486.245992 Fits 917 Series LT/YT/GT Tractors CAUTION: Before using this product, this manual and follow all Safety Rules and Operating Instructions. IMPORTANT - READ THIS FIRST!!! For Missing Parts or Assembly Please Call 866-576-8388 Mon.-Fri. 7 am - 5 pm CST.
Page 2
YEAR LIMITED WARRANTY When operated and maintained according to the instructions supplied with it, if this Tractor Brush Guard fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME ® to arrange for free repair. If this product is used for commercial warranty applies for only 90 days from the date of purchase.
Page 3
CAUTION!Muffleris hot!Allowengineto cool downbeforeproceeding with bumper installation. STEP 1 : (SEE FIGURE 2) • Remove tractor hood. (Refer to tractor manual.) Remove the browning shield as shown below. REMOVE FRONT SCREWS REMOVE BROWNING SHIELD FIGURE 2 STEP 2: (SEE FIGURE 3) Insert a hex bolt (C) into the second mounting hole from the front of the tractor frame and fully tighten a hex nut (D) onto the bolt.
Page 4
DUAL ROD DECK SUSPENSION IMPORTANT: These instructions are for tractors with dual mower deck suspension brackets like the examples shown in figure 2 on this page.. CAUTION! Muffler is hot! Allow engine to cool down before proceeding with bumper installation. STEP 1: (SEE FIGURE 1) Remove tractor hood.
Page 5
STEP 3: (SEE FIGURE 3) Place plug (E) on a work bench or solid table and push end of bumper down onto plug. Repeat for second plug. See figure 1. BUMPER PUSH DOWN WiTH EVEN PRESSURE WORK BENCH OR SOLID TABLE "__ FIGURE STEP 4:...
Page 8
For repair-in your home-of lawn and garden equipment, no matter who made it, no matter who sold it! For the replacement owner's manuals that you need to do-it-yourself. For Sears professional and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime, www.sears.com...