Elite Gourmet EPB-1800/EPB-1800A - Drink Blender Manual

IMPORTANT SAFEGUARDS

The Elite Brand takes consumer safety very seriously. Products are designed and manufactured with our valued consumers' safety in mind. Additionally, we ask that you exercise a level of caution when using any electrical appliance by following all instructions and important safeguards.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE

When using electrical appliances, basic safety precautions should always be followed as below:

1. 
   To avoid the risk of electrical shock, always make sure the product is unplugged from the electrical outlet before assembling, disassembling, relocating, servicing, or cleaning it.
2. This product is intended for use in processing foods for human consumption. Do not use the product for any other purpose.
3. Do not leave the product unattended while in use. Always unplug the product from the electrical outlet when not in use.
4. Keep the Power Cord and product away from heated surfaces.
5. Do not submerge product base in or expose it to water or any other liquids.
6. Do not use this appliance outdoors.
7. Do not use attachments not recommended or sold by the product manufacturer.
8. Use extreme caution when handling the Blade assembly as the blades are extremely sharp. Use caution when attaching or detaching the Blade assembly.
9. Do not touch moving parts (e.g., the Blades) while the product is in use. Keep hands and utensils away from the moving blade assembly while operating the product.
10. Before disassembling the product, unplug it from the electrical outlet and ensure the Blades have completely stopped.
11. Do not plug or unplug the product into/from the electrical outlet with a wet hand.
12. To disconnect from an electrical outlet, pull directly on the plug; do not pull on the Power Cord.
13. Unplug the product from the electrical outlet prior to putting on or removing parts.
14. Never operate this product if it has a damaged Power Cord or plug, is not working properly, has been dropped or damaged, or if the Base has been exposed to water or other liquids. Do not attempt to examine or repair this product yourself. Only qualified service personnel should perform servicing. Take the product to an appliance repair shop of your choice for inspection and repair.
    
    To reduce the risk of personal injury or product damage:
15. Do not allow the Power Cord to hang (e.g., over the edge of a table or counter) where it may be tripped over or pulled.
16. Always place the product on a flat, level, stable surface.
17. Keep the product out of the reach of children and pets. This product is not intended for use by children.
18. This product is intended for indoor, non-commercial, non-industrial, household use only.

SPECIAL INSTRUCTIONS:

1. To avoid a circuit overload when using this product, do not operate another high-wattage product on the same electrical circuit.
2. If an extension cord is used with this product, a 10-amp extension cord should be used. Extension cords rated for less amperage may overheat. The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the product.

SHORT CORD PURPOSE

Note: A short power cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a long cord.
Longer power-supply cords or extension cords are available and may be used if care is exercised in their use.
If an extension cord is used:

1. the marked electrical rating of the extension cord should be at least as great as the electrical rating of the product;
2. the extension cord should be arranged so that it will not drape over the counter top or tabletop where it can unintentionally be pulled on or tripped over by children or pets.

POLARIZED PLUG

If this appliance is equipped with a polarized plug (one blade is wider than the other), please follow the below instructions:
To reduce the risk of electrical shock, this plug is intended to fit into a polarized outlet only one way. If you are unable to fit the plug into the electrical outlet, try reversing the plug.
If the plug still does not fit, contact a qualified electrician. Never use the plug with an extension cord unless the plug can be fully inserted into the extension cord. Do not alter the plug of the product or any extension cord being used with this product. Do not attempt to defeat the safety purpose of the polarized plug.

PARTS IDENTIFICATION

1. Power Switch
2. Base (1)
3. Power Cord
4. Cross Blade Assembly (1)
5. Drinking Cap
6. Removable Spill-proof Lids (4)
7. Foam Grips (4)
8. Grinder Cup (1)
9. Mixing Cup (4)
10. Flat Blade Assembly (1)

NOTE: Before using the product for the first time, disassemble and thoroughly wash and dry all accessories (EXCEPT the main Base) such as the cups, blade assembly and spill-proof lids.

Ensure the product is unplugged from the electrical outlet before assembling it. Handle the Blade assembly with care as the blades are extremely sharp. Use caution when attaching, detaching, cleaning, or storing the Blade assembly.

HOW TO USE

CHOPPING & BLENDING

1. Ensure the product is unplugged from the electrical outlet.
2. Place the Base on a flat, level, stable surface.
3. Fill the Small Cup or the Large Cup with the food that you wish to chop/blend.
4. Screw the Flat Blade assembly or Cross Blade assembly clockwise onto the Small or Large Cup until secure.
5. Turn the Chopper Cup Assembly upside down so that the Blade assembly is on the bottom. Attach the assembled Chopper by aligning the three tabs on the outside of the Small or Large Cup with the three notches on the top inner edge of the Base.
6. Plug into a standard 120-volt AC electrical outlet.
7. Each Cup Assembly has three small tabs which fit into three grooves on the top lip of the Base. Press down on the Cup Assembly firmly and turn it counter-clockwise to lock into place. Press and hold the Power Pulse switch to operate. To prevent product overheating, limit continuous operation to five seconds at a time.
8. To stop processing, let go of the Power switch. Wait until the Blades stop completely before removing the Cup Assembly, then turn it clock-wise to unlock it from the Base.
9. Unplug the product from the electrical outlet when it is not in use or is left unattended.

USING DRINKING CUPS

1. Ensure the product is unplugged from the electrical outlet.
2. Place the Base on a flat, level, stable surface.
3. Fill the Small Cup or the Large Cup with the food that you wish to chop/blend.
4. Screw the Flat Blade assembly or Cross Blade assembly clockwise onto the Small or Large Cup until secure.
5. Turn the Chopper Cup Assembly upside down so that the Blade assembly is on the bottom. Attach the assembled Chopper by aligning the three tabs on the outside of the Small or Large Cup with the three notches on the top inner edge of the Base.
6. Plug into a standard 120-volt AC electrical outlet.
7. Each Cup Assembly has three small tabs which fit into three grooves on the top lip of the Base. Press down on the Cup Assembly firmly and turn it counter-clockwise to lock into place. Press and hold the Power Pulse switch to operate. To prevent product overheating, limit continuous operation to five seconds at a time.
8. To stop processing, let go of the Power switch. Wait until the Blades stop completely before removing the Cup Assembly, then turn it clock-wise to unlock it from the Base.
9. Unplug the product from the electrical outlet when it is not in use or is left unattended.

NOTE:

• Ensure that the rubber gasket, located on the inside bottom edge of the blade assembly, is in place. This will prevent leaking.
• The Cup Assembly MUST be locked in order to operate.

• The product is not intended for blending hot liquids or frozen solid ingredients. It is recommended to chop ingredients into smaller portions before freezing and then allowing the ingredients to defrost slightly before mixing. Large frozen solid ingredients may damage the cups. Use crushed ice instead of solid ice cubes.
• For liquid ingredients, do not fill the containers to their maximum capacity. Overfilling the Cups could result in spillage, causing burns and/or property/product damage. A maximum of ¾ of the capacity is recommended.

NOTE:

• The Cup Assembly must be locked in order to operate.

IDEAS

The personal drink blender is not exclusively meant for blending drinks. There are a number of uses for this appliance.

• Use the Flat Blade for chopping dry ingredients.
• Use the Cross Blade assembly to blend wet ingredients.
  • Chop nuts
  • Grate cheese
  • Scramble eggs for omelets
  • Blend fresh baby food
  • Blend salad dressing
  • Chop vegetables
  • Make bread crumbs
  • Blend dips
  • Blend sauces
  • And much more...

CLEANING & MAINTENANCE

• Always clean the product immediately after each use.
• Wash all parts except the Base in warm, soapy water; rinse, and dry thoroughly. DO NOT wash parts inside a dishwasher.
• Clean the Base by wiping it with a damp cloth. To avoid damage to the product, do not immerse the Base into water or any other liquids or place it in a dishwasher.
• To avoid damage to the product, do not use abrasive cleaners or scouring pads to clean the product parts.
• Make sure product is thoroughly dry before storing in a cool, dry place.

• To avoid the risk of electrical shock, always ensure the product is unplugged from the electrical outlet before cleaning, servicing, assembling, disassembling or relocating it.
• Handle the blade assembly with care as the blades are extremely sharp. Use caution when attaching, detaching, cleaning, or storing blade assembly.

Questions? Elite's customer service team is ready to help.
Call us toll-free at 800-365-6133 ext. 120/105.
For more Elite products, visit us at www.maxi-matic.com.
Recipes are included in this manual.