Zyxel NWA1123-AC HD - 802.11ac Dual-Radio Dual-Mount PoE Access Point Quick Start

Hardware Installation

Connect the UPLINK/POE port to a router network through a PoE switch or a PoE injector (30W). Use the included power adaptor to connect the power socket to a power outlet.

Cloud Management

Follow the steps below to manage the NWA1123-AC HD through the Zyxel cloud-based network management system.
Note: Make sure the connected router has Internet access.

1. Go to the Zyxel Nebula Control Center (NCC) website
   (http://nebula.zyxel.com). Click Login and you will be redirected to the myZyxel.com portal page. Sign up for a myZyxel account and log in.
   
2. Create an organization and a site (network) in the NCC.
   
3. Connecting:
   1. Use MAC address and serial number to add device:
      Enter the NWA1123-AC HD's LAN MAC address and serial number (S/N) (see the label on the device) in the NCC configuration screen.
      
   2. Use Nebula to add device:
      Download and open the Zyxel Nebula Mobile app. Log in with your myZyxel account. Select a site and scan the NWA1123-AC HD's QR code to add it to the site. (You can find the QR code in its web configurator dashboard or on a label on the device or its box manufactured after December 15, 2017.)
      
      
      
      
      

Standalone Configuration

If you don't want to manage the NWA1123-AC HD through the Zyxel NCC, follow the steps below to configure the NWA1123-AC HD (in standalone mode).

1. Wireless connection
   1. From a Wi-Fi enabled computer, search for the NWA1123-AC HD's d efault Wi-Fi network name (Zyxel) and connect to it. Open your web browser and enter "http://1.1.1.1" for initial configuration. Enter the default user name (admin) and password (1234). Click Login.
      
   2. Wired connection
      
2. The wizard appears automatically. Use the wizard to set up your NWA1123-AC HD. Note: It takes 1 to 2 minutes to apply your wizard changes. The power LED will blink red and green alternatively. The power and Wi-Fi LEDs then turn steady green when the system is ready. Check the Dashboard screen and note down the NWA1123-AC HD's IP address in case you need to access it's web configurator again.
   Note: The 1.1.1.1 is for initial setup only. It is not usable after the NWA1123-AC HD is configured.
   
3. Use the NWA1123-AC HD's new wireless settings (SSID and key) to re-connect to the NWA1123-AC HD's Wi-Fi network for Internet access if you change them in the wizard.
   

Wall / Ceiling Mounting

1. Drill:
   1. Drill two holes for the plastic wall plugs (A), 6.41cm apart. Insert the plugs into the wall.
      
   2. Screw the self-drilling drywall anchors (C) into the ceiling, 6.41cm apart.
      
2. Install two mounting screws through the holes on the bracket (B) into the plugs/anchors to secure the bracket to the wall/ceiling. Make sure the screws are snugly and securely fastened to the wall/ceiling.
   
3. After the bracket is attached to the wall/ceiling, line up the UPLINK/POE port on the NWA1123-AC HD with the tab of the mounting bracket (B). Push the NWA1123-AC HD in and turn it to the right until it clicks into place.
   

How to release the AP

Insert a thin flat tool (such as a flat screwdriver) to push down the AP lock.
Turn the AP in a counterclockwise direction to release.

Support Information

North America
USA
+ 1 800 255 4101
support@zyxel.com

France
+ 33 (0)4 72 52 97 97
support@zyxel.fr

UK
+ 44 (0) 118 9121 700
support@zyxel.co.uk

Spain
+ 911 792 100
soporte@zyxel.es

Germany
+ 49 (0) 2405 6909 0 s
upport@zyxel.de

See the User's Guide at www.zyxel.com for more information, including customer support and safety warnings.

EU Importer
Zyxel Communications A/S
Generatorvej 8D, 2860 Søborg, Denmark.
http://www.zyxel.dk

US Importer
Zyxel Communications, Inc1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com