Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt DCH775X2-QW
Summary of Contents for DeWalt DCH775X2-QW
- Page 1 DCH735 DCH775...
- Page 2 English (original instructions) Copyright D WALT...
- Page 3 Fig. A XXXX XX XX Fig. B...
- Page 4 Fig. C Fig. D Fig. E Fig. F...
-
Page 5: Technical Data
English HEAVY-DUTY CORDLESS SDS MAX COMBINATION HAMMER DCH735, DCH775 Congratulations! An estimation of the level of exposure to vibration and/or noise should also take into account the times when the tool You have chosen a D WALT tool. Years of experience, thorough is switched off or when it is running but not actually doing product development and innovation make D WALT one of the... -
Page 6: General Power Tool Safety Warnings
English Batteries Chargers/Charge Times (Minutes) Weight (kg) DCB104 DCB107 DCB112 DCB113 DCB115 DCB116 DCB117 DCB118 DCB132 Cat # DCB546 18/54 6.0/2.0 1.05 DCB547 18/54 9.0/3.0 1.46 135* 110* 135* DCB548 18/54 12.0/4.0 1.44 *Date code 201811475B or later NOTICE: Indicates a practice not related to f ) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) personal injury which, if not avoided, may result in... - Page 7 English c ) Disconnect the plug from the power source and/ improperly or at temperatures outside the specified range or remove the battery pack, if detachable, from may damage the battery and increase the risk of fire. the power tool before making any adjustments, 6) Service changing accessories, or storing power tools.
-
Page 8: Residual Risks
English • Do not strike jammed bits with a hammer to dislodge When using a cable reel, always unwind the cable completely. them. Fragments of metal or material chips could dislodge Important Safety Instructions for All and cause injury. Battery Chargers Slightly worn chisels can be resharpened by grinding. •... - Page 9 English hot/Cold Pack Delay • Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it When the charger detects a battery pack that is too hot or too to an authorised service centre. cold, it automatically starts a Hot/Cold Pack Delay, suspending •...
- Page 10 English • Do not charge or use battery in explosive atmospheres, materials that could contact them and cause a short such as in the presence of flammable liquids, gases or circuit. NOTE: Lithium‑ion batteries should not be put in dust. Inserting or removing the battery from the charger may checked baggage.
-
Page 11: Package Contents
English Battery Type 3 batteries of 36 Wh each. The Use Wh rating might indicate 108 Wh (1 battery implied). The following tools operate on a 54 volt battery pack: Storage Recommendations DCH735, DCH775 These battery packs may be used: , DCB546, DCB547, DCB548. 1. The best storage place is one that is cool and dry away Refer to Technical Data for more information. -
Page 12: Soft Start Feature
English into light and brittle materials without shattering and optimal tool control for precise chiseling. WALT tool tag mounting Date code To set the electronic speed and impact control dial , turn 10 holes the dial to the desired level. The higher the number, the greater Intended Use the speed and impact energy. -
Page 13: Assembly And Adjustments
English Mounting the Straight Side Handle (Fig. C) lED Function Description 1. Widen the ring opening of the side handle by rotating it 2 Yellow service exceeded anti‑clockwise. (flashing) With the service indicator lit, 2. Slide the assembly onto the nose of the tool, through the after a further 10 hours use steel ring ... - Page 14 English Operation Modes (Fig. A) 7. Always switch off the tool when work is finished and before unplugging. WARNING: Do not select the operating mode when the Drilling with a Core Bit (Fig. A) tool is running. 1. Insert the appropriate core bit. CAUTION: Never use in Rotary Drilling or Rotary Hammering mode with a chisel bit in the bit holder.
-
Page 15: Maintenance
English Wireless Tool Control (Fig. A) Dust Extraction System (Fig. F) CAUTION: Read all saftey warnings, instruction and The use of a dust extraction system is recommended to reduce specifications of the appliance which is paired with potentially harmful airborne dust and to prolong tool and the hammer. - Page 16 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be luxembourg België en luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)