Page 1
USER MANUAL PETKIT PURAX SELF-CLEANING CAT LITTER BOX Please read the User Manual carefully before using the product and keep it properly. V1.0-2023.06...
TABLE OF CONTENTS Product List Product Description Product Installation How to Use Cleaning and Maintenance Video Guide Basic Specifications A Message to Our Valued Customers User Safety Guide...
RETURN TO CONTENT PRODUCT LIST *Please ensure that all accessories are present before installation and use. Main Unit Accessories Deodorization Power Concentrated Trash Bag Module Adapter Purifying Liquid...
RETURN TO CONTENT PRODUCT DESCRIPTION OLED Display Menu Button OK Button Short press: choose menu item Entrance Main Unit Waste Container Handle Cylinder Knob Power Port *Note: In order to enhance the user experience, periodic product improvements may be implemented. The product images shown are for illustrative purposes only.
Page 5
RETURN TO CONTENT Top view of the main unit interior Cylinder Knob Dump Port Cylinder Entrance Top view of the main unit interior (A er removing the cylinder) Weight Sensors Waste Container Deodorization Module Weight Sensors...
PETKIT purifying liquid. Ensure that the liquid does not exceed the MAX line. MAX Line Please only use authentic PETKIT purifying liquid to prevent potential malfunctions caused by other deodorant liquids.
Page 7
RETURN TO CONTENT ⑤ Put the deodorization module into the ⑥ Hold the dump port with both hands main unit. Once you hear a "Click," it is and put the cylinder into the main unit. properly installed. Then, cover it with the dust-proof cover.
Page 8
① Turn the cylinder knob counterclockwise on the back of the main unit, and make sure the cylinder is fixed. ② Cover the lid of the main unit. * Note: The "PETKIT" logo should be positioned above the entrance of the main unit. The "PETKIT" logo should always face forward.
Page 9
RETURN TO CONTENT ② Spread the trash bag evenly and fasten the four corners onto the four fixtures of the waste container. Fixture ③ Put on the trash bag ring and press it tightly. Smooth the trash bag and put it back into the bottom of the main unit.
RETURN TO CONTENT HOW TO USE 4.1 Operating Main Unit Button usage Long press : Turn on/Turn o · Short press : Switch functions and the · screen will display the selected function. Short press : Execute the selected function. ·...
Page 11
RETURN TO CONTENT 4.2 Display Indication Status Indication Usage frequency Real-time weight of of the day the cat in the litter box Network status Remaining amount of cat litter Please record the type of litter in the app. As the density of di erent cat litters may vary, the displayed remaining amount of cat litter may vary slightly.
Page 12
Download the PETKIT App from App Store or Android Stores ② Add the device Open the PETKIT App and navigate to the home page. Tap the "+" button in the top right corner to add the device. Select "PETKIT PURAX SELF-CLEANING CAT LITTER BOX". 9:41...
Page 13
RETURN TO CONTENT ③ Start the connection Tap the device menu and switch to "Configure the network". Tap the OK button to initiate the connection. The screen will display "Connecting...". The app will start connecting to the device. Please wait until the configuration is successful. * Note: To enhance the user experience, occasional firmware upgrades may occur.
Page 14
RETURN TO CONTENT ④ Read replacement guide To ensure the safety of your pet and the correct usage of this product, please carefully read the Replacement Guide. Use the product properly a er successfully connecting the device for the first time. * Note: To enhance the user experience, occasional firmware upgrades may occur.
RETURN TO CONTENT CLEANING AND MAINTENANCE To ensure the health of your cat, it is important to regularly disassemble and clean the cylinder. 5.1 Emptying Cat Litter When the remaining amount of cat litter is below the specified line , you can use the "Emptying Litter"...
Page 16
RETURN TO CONTENT 5.3 Disassembling Litter Si er ① Grasp the litter si er. ② Firmly press it. ③ Make the litter si er slightly bent. ④ Remove the le buckle of the litter si er from the cylinder, and then pull out the entire litter si er.
Page 17
RETURN TO CONTENT 5.4 Cleaning Main Unit ① Wash the cylinder and litter si er. It is recommended to add an appropriate amount of detergent and rinse them thoroughly. ② Use a wet towel to wipe the surface and interior of the main unit, ensuring that the sensors remain clean.
Page 18
RETURN TO CONTENT 5.5 Installing Litter Si er ① Secure the front side of the litter si er ② Grasp the litter si er and press it until into point A. it is slightly bent. Point A ③ Secure the other side of the litter si er ④...
Grasp the dump port and put the cylinder into the main unit; A er the cylinder is placed stably, turn the cylinder knob on the back of the main unit counterclockwise and put on the lid. The "PETKIT" logo should always face forward Locked VIDEO GUIDE 6.1 Installation &...
Q: Why does it show that the lid is not in place even though I have already placed it on the main unit properly? A: Please ensure that the lid is correctly placed with the "PETKIT" logo facing the display. Q: Why does the cylinder stop rotating during the working process? A: During cylinder operation, the device activates comprehensive safety monitoring.
It is important to read and follow the User Manual before using the product. By using this product, you acknowledge that you have read and accepted the safety guidelines. · PETKIT is not liable for any accidents or injuries resulting from improper use of the product. ·...
RETURN TO CONTENT USER SAFETY GUIDE * Failure to follow the safety guides outlined below can result in product malfunction or other unforeseen mishaps. · Please install and use the product as instructed in the User Manual. · Pets under six months of age are not recommended to use this product. ·...
Need help?
Do you have a question about the T3 and is the answer not in the manual?
Questions and answers