WARNING
Suspension components become hot
●
during operation. Never touch the
compression damping force adjusting
screw, the rebound damping force ad-
justing screw or the oil reservoir with
your bare hand or skin until suspen-
sion components have cooled.
●
Always adjust the shock absorber as-
semblies on the left and right side to
the same setting. Uneven adjustment
can cause poor handling and loss of
stability, which could lead to an acci-
dent.
5UG1B002
Adjusting the rear shock absorber
assemblies (YXR7FSPD)
WARNING
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and
understand the following information be-
fore handling the shock absorber assem-
blies.
Do not tamper with or attempt to open
●
the cylinder assemblies.
Do not subject the shock absorber as-
●
semblies to an open flame or other
high heat source. This may cause the
unit to explode due to excessive gas
pressure.
4-30