Table of Contents
Advertisement
2.6.3
Onboard PS/2 Mouse (IRQ 12)
This parameter enables or disables the onboard PS/2 mouse. When
set to
Enabled
, it allows you to use the onboard PS/2 mouse
assigned with IRQ12.
mouse and makes IRQ12 available for use of other devices.
2.6.4
Setup Password
The Setup Password prevents unauthorized access to the BIOS utility.
Setting a Password
1.
Make sure that SW1 switch 3 is set to
You cannot enter the BIOS utility if a Setup
password does not exist and SW1 switch 3 is
set to
By default, SW1 switch 3 is set to
(bypass password).
2.
Enter BIOS utility and select System Security.
3.
Highlight the Setup Password parameter and press the
key. The password prompt appears:
4.
Type a password. The password may consist of up to seven
characters.
Be very careful when typing your password
because the characters do not appear on the
screen.
BIOS Utility
When set to
Disabled
On
(bypass password).
Off
(password check enabled).
, it deactivates the
On
or
2-23
Advertisement
Chapters
Table of Contents
