Reference to optional external devices
Before initial commissioning, connect the Connector box and/or
slide a communication module into the slot on the back of the
tumble dryer. For this purpose, the tumble dryer must be
disconnected from the power supply. Then start the commissioning
process.
A reference to optional external hardware appears. Confirm the
information with the
Setting the display brightness
You will be asked to set the brightness of the display.
Display brightness
Darker
Touch the segment bar for the required level of brightness.
The selected level of brightness is represented by the length of the
segment bar.
Confirm with the OK sensor.
The display will change to the next setting.
Setting the date
Date
22
September
21
August
20
July
19
June
18
May
Place your finger on the value that you want to change and move
your finger upwards or downwards.
Once all values have been selected, confirm your entry with the
OK sensor.
The display will now change to the next setting.
Confirming the time of day display query
The following question appears in the display:
not be shown?
Yes
Touch the
or
Yes
If you select
, the system will skip the
OK
sensor.
Brighter
OK
2022
2021
2020
2019
2018
OK
No
sensor.
Using for the first time
Should the clock display
Time
settings menu.
17