Reference to external
appliances
A reference to external hardware
appears.
Confirm with the
Connect the XCI box or XCI-AD
accessory unit before using the
appliance for the first time.
Alternatively, slide a communication
module into the slot on the back of the
tumble dryer. The tumble dryer must
be disconnected from the electrical
supply for this process. Then start the
commissioning process.
Setting the display brightness
You will be asked to select the
brightness of the display.
Display brightness
Darker
Touch the segment bars until you
reach the required level of brightness.
The selected brightness level will be
highlighted in orange.
Confirm with
OK
The display will change to the next
setting.
OK
sensor button.
Brighter
.
Initial commissioning
Setting the date
Date
21
22
23
24
25
Place your finger on the value that
you want to change and move your
finger in the direction you want.
Once all values have been selected,
confirm with the
The display will change to the next
setting.
OK
May
June
July
2021
August
September
OK
sensor control.
2023
2022
2020
2019
OK
23