Fuse Box - Hitachi ZW140-6 Operator's Manual

Fuse Box

IMPORTANT: If a fuse blows, turn the key switch OFF.
After checking and correcting the cause of the trouble,
replace the fuse with a new one.
Slow blow fuses (1 and 2) function as a safety valve to prevent
excess current from flowing in the electrical system.
The fuse capacity varies depending on its corresponding
circuit. Be sure to replace the blown fuses only with the
specified ones.
When checking fuses, check the fuse A, B and slow blow fuses
(1 to 3) in this order.
Capacity of slow blow fuses
1- 100A×2
2- 65A×2
3- 45A×1
OPERATOR'S STATION
1-97
Fuse Box B
Fuse Box A
Relay Boxes
MNEK-07-017
1 2 3
MPTC-01-021