Table of Contents
Advertisement
Figure 16
1. Mount plate
5.
Raise the loader arms while tilting back the
mount plate at the same time.
Important:
Raise the attachment enough to
clear the ground and tilt the mount plate all
the way back.
6.
Shut off the engine and remove the key.
7.
Engage the quick-attach pins, ensuring that they
are fully seated in the mount plate
Important:
If the pins do not rotate to the
engaged position, the mount plate is not
fully aligned with the holes in the attachment
receiver plate. Check the receiver plate and
clean it if necessary.
g003710
2. Receiver plate
(Figure
17).
1. Quick-attach pins
(engaged position)
2. Disengaged position
WARNING
If you do not fully seat the quick-attach
pins through the attachment mount plate,
the attachment could fall off the machine,
crushing you or bystanders.
Ensure that the quick-attach pins are fully
seated in the attachment mount plate.
18
Figure 17
3. Engaged position
g003711
Advertisement
Table of Contents
