Table of Contents
Advertisement
Specifications
Note:
Specifications and design are subject to
change without notice.
Model 22323
Width
Length
Height
Weight
Operating capacity (with standard
bucket)
Tipping capacity (with standard bucket)
Wheelbase
Dump height (with narrow bucket)
Reach—fully raised (with narrow bucket)
Height to hinge pin (narrow bucket in
highest position)
Model 22324
Width
Length
Height
Weight
Operating capacity (with standard
bucket)
Tipping capacity (with standard bucket)
Wheelbase
Dump height (with narrow bucket)
Reach—fully raised (with narrow bucket)
Height to hinge pin (narrow bucket in
highest position)
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
www.Toro.com
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
86 cm (34 inches)
180 cm (71 inches)
117 cm (46 inches)
864 kg (1,904 lb)
251 kg (553 lb)
717 kg (1,580 lb)
79 cm (31 inches)
119 cm (47 inches)
55 cm (22 inches)
168 cm (66 inches)
104 cm (41 inches)
180 cm (71 inches)
109 cm (43 inches)
913 kg (2,013 lb)
251 kg (553 lb)
717 kg (1,580 lb)
79 cm (31 inches)
119 cm (47 inches)
55 cm (22 inches)
168 cm (66 inches)
for a list of all
13
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age or require certified training of
the operator. The owner is responsible for training
all operators and mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety decals.
•
Always engage the parking brake (if equipped),
shut off the engine, remove the key, wait for all
moving parts to stop, and allow the machine
to cool before adjusting, servicing, cleaning, or
storing the machine.
•
Know how to stop the machine and shut off the
engine quickly.
•
Check that the operator's presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Locate the pinch-point areas marked on the
machine and attachments; keep your hands and
feet away from these areas.
•
Before operating the machine with an attachment,
ensure that the attachment is properly installed
and that it is a genuine Toro attachment. Read all
the attachment manuals.
•
Evaluate the terrain to determine what accessories
and attachments you need to properly and safely
perform the job.
•
Have the property or work area marked for buried
lines and other objects, and do not dig in marked
areas; note the location of unmarked objects and
structures, such as underground storage tanks,
wells, and septic systems.
•
Inspect the area where you will use the equipment
for uneven surfaces or hidden hazards.
•
Ensure that the area is clear of bystanders before
operating the machine. Stop the machine if
anyone enters the area.
Advertisement
Table of Contents
