Bosch 300 Series Use And Care Manual page 38

en-us Troubleshooting
Issue
Dishware is not dry.
Silverware is not
dry.
Appliance interior
still wet after wash
cycle.
38
Cause and troubleshooting
Select a wash cycle with drying. → Page 13
▶
Some option buttons decrease the drying re-
sult.
Water collects in recesses of dishware or silver-
ware.
Position dishware at an angle where possible.
▶
The combined detergent used has a poor drying
performance.
Use rinse aid to improve drying performance.
1.
Use a different combined detergent with a bet-
2.
ter drying performance.
Extra Dry/intensive drying not activated to im-
prove drying performance.
Activate Extra Dry/intensive drying.
▶
Dishware removed too early or drying process not
yet ended.
Wait until the program ends.
1.
Only remove dishware 30 minutes after the
2.
program has ended.
Rinse aid used has a limited drying performance.
Use a name-brand rinse aid.
▶
Eco products may have limited effectiveness.
Silverware not arranged properly in the silverware
basket or silverware drawer.
Droplets can form on the contact points of silver-
ware.
Arrange silverware individually where possible.
1.
→ Page 23
Avoid points of contact.
2.
Not an error. Condensation drying creates water
droplets in the tub. This is normal. Moisture in the
air condenses on the inside walls of the appli-
ance, runs off, and is pumped out.
No action required.