Bosch 300 Series Use And Care Manual page 37

Issue
E:32-00 lights up al-
ternately or indicator
for water supply
lights up.
E:34-00 lights up al-
ternately.
E:90-01 lights up al-
ternately.
E:92-40 lights up al-
ternately.
A different error
code appears in the
display window.
E:01-00 to E:90-10
Dishware is not dry. No rinse aid used or dosage set too low.
Cause and troubleshooting
Clean the filter.
6.
Reinsert the filter in the supply hose.
7.
Screw the water connection back on.
8.
Check the water connection for leaks.
9.
Restore the power supply.
10.
Switch the appliance on.
11.
Water is continuously running into the appliance.
Turn off the water faucet.
1.
Call customer service → Page 48 .
2.
Power voltage is too low.
There is no problem with the appliance.
Call an electrician.
1.
Have the power voltage and electrical installa-
2.
tion checked by an electrician.
Filters are soiled or blocked.
Clean the filters.
▶
→ "Cleaning filters", Page 34
There is a technical issue.
Press
1.
Pull out the power cord plug of the appliance or
2.
switch off the breaker.
Wait at least 2 minutes.
3.
Insert the power cord plug of the appliance in a
4.
power outlet or switch on the breaker.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press
‒
Turn off the water faucet.
‒
Pull out the power cord plug.
‒
Contact customer service → Page 48 and
‒
give the error code.
Add Rinse aid → Page 19 .
1.
Set the amount of rinse aid to be dispensed.
2.
→ "Setting the amount of rinse aid", Page 19
Cycle or cycle option has no drying phase, or dry-
ing phase is too short.
Troubleshooting en-us
.
⁠ .
37