Dell PowerEdge R910 Information Update page 9

Message
No Configurable memory
detected. System Halted.
Memory bus redundancy
feature unavailable on
Memory Riser X. System
can continue to operate
normally without
redundancy.
Recommend power-down
and reseat Riser X or strike
<F1> key to continue
without redundancy.
MemBIST error: Memory
Riser X DIMM <1>
Memory Initialization
Warning: Memory size
and/or performance may be
reduced. DIMM
unsupported: Memory
Riser <X DIMM 1 >
Memory Riser X Lockstep
Pair <DIMM 1 & DIMM
2> disabled. Unsupported
Buffer/Processor and
Memory Configuration.
Please replace the
Riser/Processor/DIMM or
remove the lockstep pair.
Description
There is a system memory configuration problem.
The PowerEdge R910 memory riser fails to support
memory bus redundancy.
Displays the location of memory riser and DIMM slot of
the failed memory module.
The PowerEdge R910 memory riser has 4 Gb DRAM
RDIMMs but the processor is not supported (Intel Xeon
processor 7500 series) and the memory riser board has
no Roman numeral "II" label.
Information Update
9