Advertisement
Device Installation/ 设备安装
C. Wall-mounted Installation/ 壁装
Place the mount in the desired installation position. Use a marker to
1
mark the screw locations. Use an 8 mm drill bit to drill the holes to
a depth of about 42 mm. Use a hammer to carefully drive the white
plastic expansion tubes into the holes.
将支架放置于安装位置 , 使用记号笔绘制螺钉安装位置，选择直径为 8mm 的
钻头，钻取深约 42mm 的导孔。 使用羊角锤将白色膨胀管打入钻好的孔内。
D. Pole-mounted Installation/ 立杆抱装
Fix the wall mount to the pole mount.
1
将壁装支架安装到抱装支架上。
2
Use the screws to fix the wall mount to the wall.
使用螺钉将壁装支架固定到墙壁上。
2
Use hose clamps to fix the pole mount to the pole.
使用喉箍将抱装支架安装到柱杆上。
4
Unfasten the screw marked with a on the universal joint for the
3
universal joint to rotate freely. Fasten screws marked with b and c to fix
the camera to the universal joint. Fasten all screws on the universal joint.
拧松万向节上 a 处的螺钉，使得万向节可以自由转动。拧紧 b 和 c 两处的螺钉，
将摄像机固定到万向节上。拧紧万向节上的所有螺钉。
b
a
c
Unfasten the screw marked with a on the universal joint for the
3
universal joint to rotate freely. Fasten screws marked with b and c to fix
the camera to the universal joint. Fasten all screws on the universal joint.
拧松万向节上 a 处的螺钉，使得万向节可以自由转动。拧紧 b 和 c 两处的螺钉，
将摄像机固定到万向节上。拧紧万向节上的所有螺钉。
b
c
a
Advertisement
