Table of Contents
Advertisement
Available languages
Available languages
Warning:
•
Do not remove the front panel or the fan guard from the outdoor unit
when it is running. You could be injured if you touch rotating, hot or
high-voltage parts.
•
Never insert fingers, sticks etc. into the intakes or outlets, otherwise
injury may result, since the fan inside the unit rotates at high speed.
Exercise particular care when children are present.
•
If you detect odd smells, stop using the unit, turn off the power switch
and consult your dealer. Otherwise, a breakdown, electric shock or fire
may result.
•
When you notice exceptionally abnormal noise or vibration, stop
operation, turn off the power switch, and contact your dealer.
•
Do not over-cool. The most suitable inside temperature is one that is
within 5 °C [41 °F] of the outside temperature.
•
Do not leave handicapped people or infants sitting or standing in the
path of the airflow from the air-conditioner. This could cause health
problems.
Caution:
•
Do not direct the airflow at plants or caged pets.
•
Ventilate the room frequently. If the unit is operated continuously in a
closed room for a long period of time, the air will become stale.
In case of failure
Warning:
•
Never remodel the air conditioner. Consult your dealer for any repair or
service. Improper repair work can result in water leakage, electric shock,
fire, etc.
•
If the remote controller displays an error indication, the air conditioner
does not run, or there is any abnormality, stop operation and contact
your dealer. Leaving the unit as it is under such conditions can result in
fire or failure.
2. Names and functions of various parts
Attachment and detachment of filter
[Fig. A] (P.4)
3. How to operate
3.1. Turning ON/OFF
ON
OFF
6
Press the [ON/OFF] button.
The ON/OFF lamp will light up in green,
and the operation will start.
* The unit will operate with the previously-
set operation mode, set temperature, and
fan speed.
Press the [ON/OFF] button again.
The ON/OFF lamp will come off, and the
operation will stop.
•
If the power breaker is frequently activated, get in touch with your dealer.
Leaving it as it is can result in fire or failure.
•
If the refrigeration gas blows out or leaks, stop the operation of the air
conditioner, thoroughly ventilate the room, and contact your dealer.
Leaving the unit as it is can result in accidents due to oxygen deficiency.
When the air conditioner is not to be used for a long
time
•
If the air conditioner is not to be used for a long time due to a seasonal
change, etc., run it for 4 - 5 hours with the air blowing until the inside is
completely dry. Failing to do so can result in the growth of unhygienic,
unhealthy mold in scattered areas throughout the room.
•
When it is not to be used for an extended time, keep the [power supply]
turned OFF.
If the power supply is kept on, several watts or several tens of watts will
be wasted. Also, the accumulation of dust, etc., can result in fire.
•
Keep the power switched ON for more than 12 hours before starting
operation. Do not turn the power supply OFF during seasons of heavy
use. Doing so can result in failure.
1.3. Disposing of the unit
Warning:
When you need to dispose of the unit, consult your dealer. If pipes are
removed incorrectly, refrigerant (fluorocarbon gas) may blow out and come
into contact with your skin, causing injury. Releasing refrigerant into the
atmosphere also damages the environment.
Caution:
•
In removing the filter, precautions must be taken to protect your eyes
from dust. Also, if you have to climb up on a stool to do the job, be
careful not to fall.
•
Turn off the power supply when the filter is changed.
3.2. Operation mode
What the blinking mode icon means
The mode icon will blink when other indoor units in the same
refrigerant system (connected to the same outdoor unit) are already
operated in a different mode. In this case, the rest of the units in the
same group can only be operated in the same mode.
Each pressing of the [F1] button cycles
through the following operation modes.
Select the desired operation mode.
Cool
Drying
Fan
Auto
Heat
Setback
* Operation modes that are not available for
the connected indoor unit will not appear
on the display.
* Depending on the indoor unit model,
either one or two set temperatures (single
or dual set point(s)) can be set for Auto
mode.
Advertisement
Chapters
Table of Contents
