Basic Programming - Sharp XE-A106 Quick Start Manual

4

Basic Programming

Turn the mode switch to the Z/PGM position.
Setting the Time
Enter the time in 4 digits ("hhmm" format) using the 24 hour system. Press the
once to program the next item or twice to exit the programming mode.
Example:
#/
SBTL
Time (2:30 p.m.)
Setting the Date
Enter the date in 6 digits using the month-day-year format. Press the
to program the next item or twice to exit the programming mode.
Example:
Date (February 15, 2010)
Setting Tax Rates (%)
Specify a tax rate (%) for calculation of tax on each taxable subtotal using the
following sequence:
#/
9
Tax number (1-4)*
@/TM
SBTL
R: Tax rate (0.0000% to 99.9999%) x 10000
(Enter the rate in 6 digits. Leading zeros may be omitted.)
Q: Minimum taxable amount (0.01 to 99.99) x 100
(Smallest amount for which tax must be collected. )
*Up to 4 types of tax are programmable.
Example 1: Tax rate 7.0000%, Min. taxable amount $0.11 for Tax 1
#/
@/TM
SBTL
Tax 1
Example 2: Tax rate 4.0000%, Min. taxable amount $0.00 for Tax 2
#/
@/TM
SBTL
Tax 2
NOTE
Your cash register is pre-programmed so that you can use it with minimum set-up.
To change the settings, see the instruction manual.
Initial settings
Departments 1-4: Taxable 1 ; Departments 5-8: Non-taxable
REG
X/Flash
OFF
Z/PGM
VOID
#/
SBTL
key once
#/
SBTL
#/ #/
SBTL SBTL
R Q
@/TM
@/TM
Tax rate (7.0000%) Min. taxable
amount ($0.11)
Tax rate (4.0000%)
5
Now, you are ready!
Before Starting Entries
Turn the mode switch to the REG position.
key
#/
SBTL
Enter a clerk code (1-4) and press
the clerk code is not needed until the clerk is changed.)
1
CLK#
Clerk code
Registration Example
(When the Customer Pays by Cash)
CLK#
Clerk code Price and dept.
Amount tendered
Reading and Resetting
X Reports (reading)
Turn the mode switch to the X/Flash position and press
Z Reports (reading and resetting)
In the Z/PGM mode, press
Flash Reports (displayed but not printed)
In the X/Flash mode:
Press dept. key for dept. sales reports
Press for sales total reports
#/
SBTL
Press for cash-in-drawer reports
CH
For further information, please read the instruction manual.
REG
OFF
VOID
. (Once the clerk code entered, re-entry of
CLK#
5 7
#/
3
1 SBTL
Price and dept.
.
.(In this case, grand total resetting is not performed.)
Printed in China
X/Flash
Z/PGM
O(TCADH2554RCZZ) 