Philips S9781/31 Manual page 70

Problem
The shaver is
not entirely
clean after I
clean it with
the SmartClean
system.
Possible cause
The cleaning
cartridge is empty.
The replacement
symbol flashes to
indicate that you
have to replace the
cleaning cartridge.
You have not
placed the shaver in
SmartClean system
properly, so there
is no electrical
connection
between
SmartClean system
and the shaver.
The battery of
the shaver is not
charged sufficiently.
The cleaning
cartridge needs to
be replaced.
You have used
another cleaning
fluid than the
original Philips
cleaning cartridge.
Solution
Place a new cleaning
cartridge in the SmartClean
system (see 'Replacing the
cartridge of the SmartClean
system').
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.
If the battery of the shaver
is not charged sufficiently,
the SmartClean system
may not work properly.
The shaver needs to be
able to switch on briefly
during the rinsing phase.
Charge the shaver for a
short time before you use
the SmartClean system to
clean your shaver.
Replace the cleaning
cartridge (see 'Replacing
the cartridge of the
SmartClean system').
Only use the original Philips
cleaning cartridge.
69
English