Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KAKA Industrial W01-2422
Summary of Contents for KAKA Industrial W01-2422
- Page 1 SLIP ROLL W01-2422 (24”) W01-4022 (40”) OPERATION MANUAL...
- Page 2 Specifications Model Max. Max. Roller Packing Size Thickness Width Diameter Weight W01-2422 0.8mm 610mm 38mm 95x27x38cm 30kg W01-4022 0.8mm 1000mm 50mm 148x35x50cm 86kg Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram.
- Page 3 oil and grease. Follow instructions for lubricating and changing accessories. 11. CHECK DAMAGE PARTS. Before using any tool, any parts that appear damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and other conditions that may affect its operation.
- Page 4 Bolt (#35) clockwise. c. To increase distance, turn Adjusting Bolt (#35) counterclockwise. 3. Adjust distance between Shaft 1 (#8) and Shaft 3 (#7) if necessary a. The distance between Shaft 3 (#7) and Shaft 1 (#8) can be adjusted by turning the Adjusting Bolts (#22). b.
- Page 5 4. To remove the finished roll, pull out Sleeve (#10) on the end of Shaft 1 (#8), nearest the Handle (#23), and swing Shaft 1 out of the Right Stand. Then remove the steel roll from Shaft 1. Forming Rings The half-round slots on the right side of Shaft 2 (#20) and Shaft 3 (#7) can be used to form rings of various dimensions.
- Page 6 PARTS LIST Part # Description Left Stand Nut M12 Hex Bolt M12x40 Support Bushing Square Bushing Flat Key 4x20 Shaft 3 Shaft 1 Right Stand Sleeve Washer Spring Washer Screw M8x16 Cover Hex Bolt M8x16 Spring Washer Washer Bearing Small Gear Shaft 2 Base Adjusting Bolt...
- Page 8 Note: This manual is only for your reference. Owing to continuous improvement of the machines, Changes may be made at any time without obligation on notice.
Need help?
Do you have a question about the W01-2422 and is the answer not in the manual?
Questions and answers