Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for KAKA Industrial W01-5116
Summary of Contents for KAKA Industrial W01-5116
- Page 1 SLIP ROLL Model: W01-5116(50”) ASSEMBLY & OPERATING INSTRUCTION...
-
Page 2: Specifications
Specifications 1.1 Maximum capacity 50” 1.2 Minimum roll size 3” 1.3 Gauge 16gauge mild steel 1.4Rod/wire grooves dia: 5/16”,3/8”,1/2” 1.5Approx.ship.weight: 524ibs Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. -
Page 3: Assembly And Adjustment
and grease. Follow instructions for lubricating and changing accessories. 11. CHECK DAMAGE PARTS. Before using any tool, any parts that appear damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and other conditions that may affect its operation. -
Page 4: Operation
3. Adjust distance between Shaft 1 and Shaft 3 if necessary a. The distance between Shaft 3 (#7) and Shaft 1 (#8) can be adjusted by turning the Adjusting Bolts (#22). b. To decrease the distance between the two shafts, turn the Adjusting Bolts (#22) clockwise. -
Page 5: Parts List
Forming Rings The half-round slots on the right side of Shaft 2 (#20) and Shaft 3 (#7) can be used to form rings of various dimensions. 1. Insert the steel in half-round slot of Shaft 2 (#20) or Shaft 3 (#7). 2. - Page 6 Hex Bolt Washer Spring Washer Large Gear Small Shaft Hex Bolt Locking Screw Adjusting Bolt Hex Bolt Spring Washer Flat Washer Gear Long shaft Bushing...
- Page 8 Note: This manual is only for your reference. Owing to continuous improvement of the machines, Changes may be made at any time without obligation on notice.
Need help?
Do you have a question about the W01-5116 and is the answer not in the manual?
Questions and answers