Sharp VN-EZ1U Operation Manual page 19

Advanced Features
Selecting the Iris Mode
When the amount of light that the lens receives is too much
or insufficient for recording, the Lighting indicator appears
on the LCD monitor.
Set the Iris select switch to the
with the lighting condition.
When no indicator appears, we recommend that you
normally set the Iris select switch to the
When the Lighting indicator "
select switch to the position. The
too much light.
Iris select
switch
Set when it
Set when it is in
is too bright
normal conditions.
53
or
Lighting indicator
or position to match
position.
" appears, set the Iris
indicator means
Notes:
• Make sure the iris select switch is not set in between the
and positions.
• Under the dark or extremely bright lighting conditions, the
Lighting indicator may not disappear even if you switch the Iris
mode. This does not indicate malfunction.
• on the LCD monitor indicates lack of light. In this case,
using a video light is recommended.