Table of Contents
Advertisement
installation
3. Remove the middle hinge. Lift the lower
door and place it on a padded surface to
prevent from being scratched.
4. Remove the screw and stop block from the
bottom of the lower door and move it to
the opposite side. Remove also the door
stopper and keep it for future use. For the
opposite side, use the door stopper for left
side. Screw tightly.
Door stopper has left and right side.
The door stopper packed as an
accessory is for the left side.
5. Lay down the unit. Remove both levelling
feet, levelling feet fix board and bottom
hinge. Swap the position of the levelling feet
fix board with the bottom hinge.
6. On the bottom hinge, move the position
of the bottom hinge pin to the other hole.
Tighten the pin securely.
9
Advertisement
Table of Contents
