Contents safety warnings ........................4 unpacking ..........................6 installation ........................... 7 location ..........................7 levelling and anchoring the unit ..................7 free space requirements ....................7 installing the spacers ....................... 7 removing the door handles ....................8 removing the doors ......................9 cleaning before use ......................11 before using your unit .....................11 product overview ......................
safety warnings For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. • Read all instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party, make sure to include this manual.
Page 5
• Children should be supervised to ensure that they do not play with the unit. • If your unit is fitted with a lock to prevent children being trapped inside, keep the key out of reach and not in the vicinity of the unit. • Do not store volatile or flammable substances, such as aerosol cans with a flammable propellant, in the unit.
Thank you for purchasing your new Kenwood Fridge Freezer. These operating instructions will help you use it properly and safely. We recommend that you spend some time reading this installation/instruction manual in order that you fully understand all the operational features it offers.
installation installation location When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well ventilated with an average room temperature of between 16°C and 38°C. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption.
installation removing the door handles tool required: Hex wrench • Ensure the unit is unplugged and empty. • All parts removed must be saved to do the reinstallation of the door. 1. unscrew handles with Hex wrench. 2. Pull to remove the handles. 3.
installation removing the doors tool required: Philips style screwdriver / Flat bladed screwdriver • Ensure the unit is unplugged and empty. • To take the door off it is necessary to tilt the unit backwards. you should rest the unit on something solid, e.g.
Page 10
installation 3. unscrew top hinge. 4. lift the door and place it on a soft pad. Repeat the above steps to remove the other door. 5. unscrew bottom hinges. 6. After the unit is positioned, install and screw back the doors.
installation cleaning before use Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using a sponge or cloth. Wipe completely dry before replacing the drawers. Clean the exterior of the unit with a damp cloth. If you require more information refer to the Cleaning section.
display and control panel Fridge Freezer Lock Mode 3 sec. button 1. Freezer button: Press to adjust temperature of freezer compartment from -14˚C to -22˚C. 2. Fridge button: Press to adjust temperature of fridge compartment from 2˚C to 8˚C and “OFF”. If “OFF” is selected, the fridge compartment will turn off. 3. Mode button: Press to select running mode from SmART mode, ECo mode, SuPER CoolING mode, SuPER FREEzING mode and user’s setting (no symbol in display). 4.
operation temperature setting • Fridge temperature setting 1. Temperature range: 2°C to 8°C. 2. Press the Fridge button repeatedly to set the temperature. • Freezer temperature setting 1. Temperature range: -14°C to -22°C. 2. Press the Freezer button repeatedly to set the temperature. smart mode • Press the Mode button to select the SmART mode.
preparations for freezing • use quality food and handle it as little as possible. Freeze food in small quantities as it freezes faster, takes less time to defrost and enables you to control the quantity you need better. • leave cooked food to cool completely. Chill food before freezing if possible. • Consider how you will want to cook the food before freezing it.
cleaning cleaning the interior and the exterior of the unit • Remove all the shelves and drawers. • Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with warm water using a sponge or cloth. Wipe completely dry before replacing the shelves and drawers. • use a damp cloth to clean the exterior, and then wipe with a standard furniture polish.
maintenance care when handling / moving your unit Hold the unit around its sides or base when moving it. under no circumstances should it be lifted by holding the edges of the top surface. servicing The unit should be serviced by an authorised engineer and only genuine spare parts should be used.
Model KFF2DW14 / KFF2DS14 Appliance Category Category 7 (Refrigerator – Freezer) Overall Dimension (W x D x H) 900 x 700 x 1780 mm Total Gross Volume 546l Fresh Food Storage Volume 335l Frozen Food Storage Volume 167l Defrosting Type...
Page 20
For general information about this appliance and handy hints and tips, please visit www.knowhow.com/knowledgebank or call 0344 5611234. visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day.
Need help?
Do you have a question about the KFF2DW14 and is the answer not in the manual?
Questions and answers