Troubleshooting - Sanyo DVP404U Manual

7.Troubleshooting

No power
No picture
No sound
Distorted sound
No fast forward or fast reverse
No proper aspect ratio
No operations can be performed
with the remote controller
No button operation
Audio soundtrack and/or Subtitle
language is not the one you
selected.
No Angle change
Insert the AC power plug securely into the power outlet.
Make sure that the equipment is connected properly.
Make sure that the input setting for TV is Video (AV).
Make sure that the equipment is connected properly.
Make sure that the input settings for the TV and stereo system are
correct.
Some discs may have sections that prohibit fast forward or fast
reverse.
Select the correct setup for TV aspect ratio that matches your TV
set.
Check the batteries are installed with the correct polarities.
Point the remote control unit at the remote control sensor and
operate.
Remove the obstacles between the remote control unit and remote
control sensor.
Set the POWER button to OFF and then back to ON.
Alternatively, turn off the power, disconnect the power plug and
then reconnect it.
If the audio soundtrack and /or subtitle language does not exist on
the disc, the language selected at the initial settings will not be
seen.
This function is dependent on software availability. Even if a disc
has a number of angles recorded, these angles may be recorded
for specific scenes only.
- 33 -