Miele H4886 BP Installation Instructions Manual
Hide thumbs
Also See for H4886 BP:
- Operating and installation manual (80 pages) ,
- Dimension manual (2 pages) ,
- Manual (7 pages)
Related Manuals for Miele H4886 BP
Summary of Contents for Miele H4886 BP
- Page 1 Installation Instructions H4884 BP, H4886 BP Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information.
-
Page 2: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of an old appliance materials Old appliances may contain materials that can be recycled. Please contact The cardboard box and packing your local recycling authority about the materials protect the appliance during possibility of recycling these materials. -
Page 3: Electrical Connection
Electrical connection Power supply CAUTION: Before servicing, The oven is equipped with a 6 ft. disconnect the power supply by (1.8 m) flexible power cord consisting either removing the fuse, shutting off of 4 wires ready for connection to a the power main or manually dedicated 3 pole, 4 wire grounded "tripping"... -
Page 4: Appliance And Cut-Out Dimensions
Appliance and Cut-out Dimensions Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer. - Page 5 Appliance and Cut-out Dimensions a Vent cut-out (min. 24" / 150 cm ) possible at rear or platform of cabinet b Cut-out for power cord (min. 1" / 3 cm c Power cord For the most current specifications see the Miele web site.
-
Page 6: Installing The Oven
Installing the oven The oven must be installed into cabinetry and be supported from underneath. IMPORTANT INFORMATION Certain cabinet materials and finishes are very sensitive to high temperatures. To eliminate the risk of damage to surrounding cabinets, a 24 square inch (2"x12") [150 cm minimum opening must exist in the cabinet to allow air to flow into and around the appliance. - Page 7 Installing the oven ^ Slowly shut the door until the protruding clamps stop the movement. Pull the door upward. ^ Connect the oven to the electrical supply. ^ Slide the oven into the cabinet and align. ^ Reinstall the door. ^ Open the oven door and locate the two mounting screw holes in the oven frame.
- Page 8 Installing the oven Set the time "Enter Time: hh:mm" will appear in the display once the oven is connected to electricity. ^ Set the current time using the keypad. ^ Save the time by touching the "OK" control.
- Page 10 Alteration rights reserved / 2311 M.-Nr. 07 964 270 / 00 (H 4884 BP, H 4886 BP) INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.