Table of Contents
Advertisement
Chapter 2 Useful Features
5.3.2
Manual Rebuild
1. Replace a physical device and turn on the server.
2. Run LSI Software RAID Configuration Utility.
3. From the TOP menu, select Rebuild.
The Rebuild – PHYSICAL DRIVES SELECTION MENU screen appears.
4. Move the cursor onto the physical device indicating "FAIL", and then press the <Space> key to select it.
The color of "FAIL" indication for the selected physical device changes to pink.
5. Press the <F10> key.
6. Select Yes to start the rebuild process.
When the Completed indication on the REBUILDING screen indicates 100%, the rebuild process is
completed.
7. Press the <Esc> key to return to the TOP menu and exit LSI Software RAID Configuration Utility.
By default, rebuild starts automatically after you replace a physical device.
Tips
Replace a physical device.
Run LSI Software RAID Configuration Utility
Perform the rebuild process
Exit LSI Software RAID Configuration Utility
Rebuild – PHYSICAL DRIVES SELECTION MENU
ONLINE A00-00
0
FAIL
1
Express5800/R120g-2E, T120g Maintenance Guide
PORT #
A00-01
5. RAID System Configuration
139
Advertisement
Table of Contents
