Philips 6000 Series User Manual page 15

EnglisH
14
Problem
Reduced
shaving
performance.
The shaver
does not work
when I push
the on/off
slide upwards.
troubleshooting
This chapter summarises the most common
problems you could encounter with the appliance. If
you are unable to solve the problem with the
information below, contact the Consumer Care
Centre in your country.
Cause
The shaving heads
are dirty. You have
not cleaned the
shaver well enough
or you have not
cleaned it for a
long time.
Long hairs
obstruct the
shaving heads.
The shaving heads
are damaged or
worn.
The shaver is not
connected to the
mains.
Solution
Clean the shaver thoroughly
before you continue shaving.
See chapter 'Cleaning and
maintenance'.
Clean the cutters and guards
with the cleaning brush
supplied. See chapter 'Cleaning
and maintenance', section
'Every two months: shaving
heads'.
Replace the shaving heads
every 2 years for optimal
shaving results. See chapter
'Replacement'.
Put the mains plug in the wall
socket.