Table of Contents
Advertisement
7-11
"Monitoring Unit Setting"
Register from this screen if you want to receive the error messages sent from the control device *
nected to VRF network.
Monitoring can be performed by BI/MI Object on the BACnet communication.
Select the menu items in order of "Setting" → "Monitoring Unit Setting" from the Menu bar.
Click the "New Registration" button when registering the unit to be monitored newly.
When changing registered unit, click the "Change" button displayed at the right of corresponding unit.
When deleting registered unit, click the "Delete" button displayed at the right of corresponding unit.
New Registration;
(a) Select the adaptor to which equipment to be monitored is connected.
The control unit to be monitored is the equipment *
(b) Enter the lower order of VRF address. (high order is 200 only)
(c) Enter "Object Instance Number" in order to read in from BACnet Device.
Make the number unique in UTY-ABGXZ1.
(d) Enter "Object Name" similarly.
Copyright© 2010-2017 Fujitsu General Limited. All rights reserved.
1
corresponding to V-II and later series.
50
1
con-
Advertisement
Table of Contents
